Motorcycle 7 Colors LCD Meter Speedometer Odometer Gauge Instrument Modification Accessory

Feature: 1. 7 colors backlight can be switched freely, press the button for 3 seconds to switch the backlight color when the odometer is ODO. 2. It can be used as fuel gauge, speedometer, tachometer and odometer. 3. LCD display, high definition, easy to read, practical for using. 4. Easy to install, no complicated tools required, convenient to use. 5. Built to strict quality control standards, dependable to use. Specification: Condition: 100percent Brand New Item Type: Motorcycle Speedometer Color: Black Shell Material: IronScreen: LCD Display Speed Meter: Maximum display 199, can be set to KM H and mile MPH Tachometer: Maximum display 10000 RPM Oil Gauge: With two lines (8 98 Ohm ) and three lines (33 565 Ohm ) Odometer: There are ODO and TRIP two modes, the default display ODO. Wiring: Black positive pole wire Green negative pole wire Black red speed signal wire Blue white oil signal wire Fitment: Fits for Honda Motorcycle Fits for Kawasaki Motorcycle Fits for Yamaha Motorcycle Fits for Suzuki Motorcycle Instruction: KM H and MPH Switching: Hold down the key and turn on the switch. The screen shows P0000. Long press to the tens digit and 0 flicker, short press to the tens digit and display 1, long press to hundreds digit flicker, short press 6 to hundreds digit to display 6. Press the thousand digit for a long time to flash, and press the thousand digit for 6 times to display 6. At this time, the screen displays 00466, indicating that 46.6hz corresponds to 60KM H. Short press units digit (this is not set), when the screen shows 1001, 1001 means KM H, if you want to switch to MPH Long press the units digit to blink, long press to switch to 1002, indicating that it has been set to MPH. Short press to jump to the next item. Speed Cylinder Number Setting: Press the screen to display 2002, indicating that it is 2 cylinders (166HZ corresponds to 10x1000RPM MIN). Short press units digit pass and long press the units digit to flash, then long press the units digit, switch 2 to 4, indicating that it has been switched to 4 cylinder (333HZ corresponds to 10x1000RPM MIN). Fuel Gauge Settings: Press the screen to display 3002, indicating that it is a 2 line oil meter at this time. Press all Settings and save to exit. Long press single digit flash, long press to display 3003, indicating that the oil meter has been switched to line 3, short press to save and exit Package List: 1 x Motorcycle Tachometer