LCR-T4 ESR Meter Transistor Tester Diode Triode Capacity SCR Inductor

About this item: 1. Automatic test of the pin of a component and display on the 128 * 64 LCD backlight. 2. Measure bipolar transistor current amplification factor and base emitter threshold voltage. 3. Powered by 9 V layer-built-in battery, 2 Li-ion batteries can use to form a 8.4 V battery set for long-term energy. 4. Test speed: 2 seconds (1 minute is normal for a large capacitor) 5. Displayed value: 25pf-100mF (resolution 1pF)

Product description Features: 1. Powered by 9V layer built in battery, can use 2 Li-ion batteries to form an 8.4V battery set for long-term energy. 2. Measure the bipolar transistor current gain factor and the base emitter threshold voltage. 3. Automatically test the pin of a component and display on the 128 * 64 LCD backlight. 4. Measure the gate and gate capacity of the MOSFET threshold voltage. 5. One button operation, automatic switch-off, only 20nA switch-off current. 5. The penetration voltage is less than 4.5V, the Zener can be identified. 2uF more 6.capacitors can simultaneously measure the equivalent series resistance ESR values. 7. About the base - emitter - threshold voltage and high current gain factor for detecting 8. Darlington - transistors. 9. Can measure two resistors at the same time and display the resistance symbol. 10. Displayed on the right with a decimal value of 4. 11. Can capture the transistor, the MOSFET protective diode reinforcement coefficient and the base to determine the emitter transistor forward voltage. 12. Automatic detection of NPN and PNP transistors, N-channel and P-channel MOSFET, diode (including double diode), thyristors, transistor, resistance and capacitor and other components

Specifications: 1. Material: PCB 2. Energy mode: 6F22. 3. Display: 128 x 64 LCD backlight. 4. Test speed: 2 seconds (1 minute is normal for a large capacitor) 5. Shut-off current: 20 nA. 6. Displayed value: 25pf-100mF (resolution 1pF) 7.Induction: 0.01 mH-20H 8.Resistance: ≤ 2100 Ω. 9.Power Full: 9V layer battery / 2 Li-ion batteries to form an 8.4V battery 10.Resistance Measurement Resolution: 0.1 Ohm 11.The highest measured value: 50 m ohm. 12. Test current: approx. 6mA 13.Product size: 7.2 x 6.25 cm (L x W). 14. Item weight: 30g

Package contents: 1 x LCR-T4 ES