Pigeon Breastmilk Realization Direct Attach Baby Bottle 200ml Transparent High Flow 2 Sets Set, (Low Burden, Rate)

---------------------------------------------------------------------- [About Pigeon Breast Milk Realization Direct Attachment Nipple S (Low Burden, High Flow)] For cases where the flow rate is low with the SS size. Raw material: Silicone rubber Feature 1: Uses latch-on line The "latch-on line" is used as a guide for the depth at which the nipple should be held in the mouth. It guides the baby to the appropriate depth. Feature 2: Improved nipple elasticity A new low-hardness silicone rubber has been developed that allows for smooth tongue movements. By adjusting the thickness, it is closer to the softness of the nipple. Feature 3: Improved flexibility of the nipple base The nipple part is softer than before, allowing for a more natural attachment. ＜Disinfection and sterilization methods＞ Boiling method: Yes Chemical solution method: Yes High-pressure steam method (autoclave): Yes ＜About cleaning＞ Please use a neutral detergent for cleaning. Milk fat and protein are easily attached to the bottle and nipple and are difficult to remove, so they may stick to the nipple over time and discolor it. After breastfeeding, place the bottle and nipple in lukewarm water immediately after use and wash as soon as possible. ＜Replacement Guideline＞ Silicone rubber nipples should be replaced 2 months after use, or after a total of 24 hours of boiling disinfection or 20 hours of autoclaving. Regardless, if you notice any tears, cuts, deterioration or other abnormalities, please replace it.