Handheld 6 In 1 Metal Detector Wall Finders Multifunction Wood Stud Finder Metal Pipes AC Wire Metal Depth Measure Floor Scanner

Good luck with your favorite purchasesHandheld 6 in 1 Metal Detector Wall Finders Multifunction Wood Stud Finder Metal Pipes AC Wire Metal Depth Measure Floor Scanner ●Name:Wall board floor Finder ●Model:HW-810 ●Battery Type:9V battery(6F22)-mot included** Product Features ·1/2"Stud Scan Mode:Detects wood or metal studs up to 13mm deep ·1"Stud Scan Mode:Detects wood or metal studs up to 25mm deep ·1 1/2"Stud Scan Mode:Detects wood or metal studs up to 38mm deep ·Metal Mode:Detects metal up to 80mm for magnetic(60mm for non-magnetic) deep ·AC Mode:Detects live unshielded AC wires up to 51mm deep ·Metal Depth Indicator ·Green Backlight ·Low Voltage Indicator ·Operating Current:<50ma ·Shutdown Current:<10UA ·Automatic Shutdown Time:3 minutes Detection Mode Selection ①Stud Mode In stud mode, there are 3 scan modes o choose for properly thick of the scanning surface: 1/2"Scan Mode can detect 1/2 in. (13mn) deep. 1"Scan Mode can detect 1 in. (25mm)deep. 1 1/2"Scan Mode can detect 1 1/2 in.(38mm) deep. If you don't know the depth of the detection, it is recommended to use 1/2"scan mode first. When 1/2"scan mode is not detected, use 1"or 1 1/2"scan mode instead. ②Metal Mode: The detection of magnetic metal can be as deep as 3.2 in. (80mm)(diameter 15mm galvanized steel tube) It can detect non-magnetic metals up tc 2.4 in. (60mm) (diameter 13mm copper tube). ③AC Mode: Detect unshielded AC live wire up to 2 in. (51mm) deep.