MOUNTING FOOT MAST ANCHOR SCREWED INTO CONCRETE GRAPHITE BASE BRACKET 12 × 12 cm COLOR: GRAPHITE | PERMANENT FASTENING | SOLID CONSTRUCTION | ⏱ QUICK ASSEMBLY Are you looking for a stable base for a mast or pole ? Our durable foot will work great in your garden and will be a safe base not only for masts! HIGHEST QUALITY STEEL The mounting foot is made with attention to every detail, using high-quality steel and precise production methods. Powder coating not only provides an aesthetic finish, but also guarantees longevity and resistance to adverse external factors . The design is refined to ensure maximum durability , safety of use and impeccable appearance even after many seasons. RUST RESISTANT The foot is made of steel and covered with a durable layer of powder paint, which effectively protects it against corrosion . This type of coating creates a uniform, smooth surface resistant to moisture, UV radiation , as well as minor mechanical damage . The use of powder coating technology significantly extends the life of the element, even with prolonged outdoor use – in the garden, on an allotment or next to outbuildings. SIMPLE AND QUICK INSTALLATION Installing the foot does not require specialized tools or advanced technical knowledge. Simply prepare a stable surface (e.g. concrete) and use standard screws or mounting anchors with a diameter of 1 cm. Mounting is intuitive and quick – the whole thing can be done by yourself in a few minutes. An additional convenience is the 10° tilt of the structure , which allows you to easily set the mast or pole in the optimal position – without the need to adjust or cut elements . FOR ALL WEATHER - YEAR-ROUND DURABILITY The mounting foot is designed for outdoor use, year-round . Thanks to the use of powder-coated steel, the product is resistant to: UV radiation – does not fade in the sun, rain and moisture – does not rust or swell, frost and temperature changes – retains stiffness and stability. RESISTANT TO LOADS The solid foot construction made of thick steel (3 mm base, 2 mm walls) ensures high load capacity and pressure resistance . It can be successfully used for mounting more massive masts, posts or wooden and metal structures. Thanks to its stiffness and durability, the base does not deform under the weight of and maintains stability even under strong wind or mechanical load . APPLICATION Base for: wooden masts metal masts poles timbers antennas gazebo poles swings pergolas decorations and more! In our other offers you will find masts, shade sails and much, much more! SPECIFICATION material: powder coated steel mast tilt: 10° color: graphite base dimensions: 12 × 12 cm height: 15.5 cm base thickness: 3 mm profile wall thickness: 2 mm hole diameter: 1 cm weight: 0.8 kg INSTALLATION INSTRUCTIONS FOR INSTALLING THE FOOT TO THE MAST/POLE Choose a suitable mounting location: It is best if it is hard and even concrete screed, paving slab, or solid foundation. Mark the hole locations: Position the footing in its final location, then mark the mounting holes with a pencil or marker (hole diameter: 1 cm). Drill the holes in the substrate: Use a hammer drill with an appropriate concrete drill bit. The depth of the holes should correspond to the length of the expansion bolts or anchor screws. Install the anchors or expansion bolts: Insert the anchors into the holes, then position the foot and secure it using mounting bolts (M10 steel anchors or bolts with nuts and washers are recommended). Tighten the fasteners: Use a socket or open-end wrench to firmly tighten all bolts. Make sure the foot is stable and does not move. Insert the mast or pole into the bracket: Slide the mast into the foot. If necessary, you can further secure it with side bolts or a clamp. FAQ – Frequently Asked Questions Does this product fit a mast with a diameter larger than 4 cm? The base is designed for masts with a diameter of approximately 4 cm – larger masts may require modification or different mounting. Can the foot be used on surfaces other than concrete? Yes, provided it is properly mounted – however, it works best on stable, hard surfaces. Is the foot corrosion resistant? Yes, powder coating protects the steel against moisture and UV rays. What mounting screws should I use? We recommend using screws with a diameter of 1 cm, suitable for the type of surface (not included).
No-delivery refund
