Flute Cleaning Swab by Atelier Tomaaz (Care Cloth) (Pink N20)

------------------------------------------------------------------------------------------------------------------ 【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction.

【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary.

【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product.

【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. ------------------------------------------------------------------------------------------------------------------

To use the cleaning cloth (swab), insert the dedicated cleaning rod (sold separately) through the slit in the opening. The length is just long enough for the cleaning rod to fit snugly, so there's no need to worry about the cleaning rod cap scratching the inside of the instrument. Even children can easily clean the instrument. To clean the main joint and foot joint, insert the cloth (swab) horizontally and slowly without turning. To keep every corner clean and remove as much moisture as possible, once the cloth (swab) is inside the tube, hold it for about 5 seconds and then slowly pull it out. The tubular cloth will then adhere to the inner wall of the tube, absorbing moisture and dirt from every corner as much as it wants. If you pull it out too quickly, its effectiveness will be halved, the swab will be more likely to be damaged, and lint will be more likely to remain inside the tube. To clean the head joint, simply insert the reflector slowly without turning it all the way to the back, hold for about 5 seconds, and then pull it out smoothly. The tip of the cloth is designed to fit snugly to the shape of the back of the reflector, and has fabric built in to increase water absorption. Please note that quantities are limited as these items are carefully made by hand. - Please insert the dedicated rod (sold separately) into the cleaning cloth before use. Material: Microfiber (wash by hand if dirty) ・Length: Approximately 39cm (for both H and C pipes) ・If left wet for a long time, color bleeding or transfer may occur. Avoid prolonged contact with other fabric products and washing them at the same time. - Please note that dark colored items may transfer color to the caps on both ends of the cleaning rod. - Depending on the instrument you are using, the size may not fit. -As each item is individually sewn, there may be slight differences in size. -The texture and thickness may vary depending on the color of the fabric. -The actual color may differ slightly depending on the monitor environment. ・Design registration No. 1511508 ·made in Japan