Angle Grinder Nut Angle Grinder Accessories Anti-rust

Ok.

Pk

Ok.

Pk

They have the nuts for the angle grinder. I have thin strips: 4-5mm. I add after installing them to "bolgarka". —— The ordered nuts for the grinder arrived. A little thin: 4-5mm.

It's small and doesn't work on the flex

Received it on post-payment. The package was torn. The item was all there. The pants fit the size. Everything is as in the description. I haven't used the opener and the nut for the angle grinder yet.

Only after receiving it I discovered that I had made a mistake in my choice. The nut is good, but for an angle grinder 100 for an M10 mm shaft, and I have an Angel 115 with an M14 mm shaft.

It didn't fit an ordinary Bulgarian, it was too small. For some toy. The description does not include the dimensions of the internal thread. I do not recommend the seller

The Makita does not fit a thread with a diameter smaller than the original. Money down the drain. It would not even occur to me that there is an angle grinder with a smaller shaft.

The nut is small. It doesn't fit. The photo shows a large nut. It matches the description. I didn't read the description carefully.

When you list the product, it would be nice to indicate the size. Now where can I find a grinder for such nuts?

The nut is good, no questions. But read the description, it is 10mm. Will not fit a standard turbine.

In the photo, the nut is screwed onto the angle grinder, in reality it is for a micro angle grinder. A reduced copy of the nut.

It didn’t fit any of the grinders, and the threads didn’t fit the mini-grinder Nick 120.

Small nut, not M14. Scam.! Which angle grinder is it suitable for?

I don't know which machine it is for. The grinder is 14 thread. And this is... On 10.

The nut is good but the diameter is wrong, it doesn't fit, I overlooked it

I ordered with a diameter of 14 mm, but it arrived with a diameter of 10. How?

The nut diameter is not specified! As a result, a 12 diameter one arrived

I received the order, I am very pleased, thank you for the good service!

Didn't fit the small angle grinder. The thread is smaller.

The thread does not fit the grinder!!!! Complete 💩💩💩💩💩

Too small. They don't fit our grinders.

Convenient to unscrew when replacing the cutting wheel

Small size, does not fit 14 thread.

M10 is not suitable for ordinary small angle grinders

Small thread size. Didn't fit..

The small nut does not fit M14.

Doesn't fit a large grinder.

Cast nut with washer, not hinged

Wrong size. Good quality.

Nut for toy Bulgaria

Does not fit a regular angle grinder

It doesn't fit a regular grinder.

It doesn't fit the 125 grinder

The diameter did not fit. Too small.

The nut works, I recommend it.

Doesn't fit a 125 grinder

didn't fit in size

M12 thread is not suitable

It wasn't too small

Nut is the wrong size

The thread size is wrong

For some mini ushm.

Size small

The nut didn't fit

A bit too narrow

M10 instead of M14….

Wrong size

Thank you