Uxcell XLR Cable Y-Splitter, 1 Female To 2 Male + 1 Male To 2 Female, 2-Pack, 0.3m, 3-Pin, for Mixers, Microphones, Speakers, Balanced Connection,

XLR Y-Splitter Cable Set (2 cables): This set includes one 1-female to 2-male (female-dual male) cable and one 1-male to 2-female (male-dual female) cable. Each cable is approximately 30cm long and 4mm in diameter. Used for signal splitting and coupling in audio equipment with XLR connectors, such as microphones, mixers, and speakers. Package contents: 2 Y-splitter cables (1-female to 2-male x 1, 1-male to 2-female x 1). Signal distribution via 1 female to 2 male, signal coupling via 1 male to 2 female: 1 female-2 male: Used to distribute one XLR female output (e.g., microphone) to two XLR male inputs (e.g., mixer 2ch). 1 male-2 female: Used to combine two XLR female outputs (e.g., mixer L/R) into one XLR male input (e.g., mono speaker). Provides flexible wiring for live stages, recording, and streaming. Copper conductor + braided shield + aluminum foil multi-layer shielding structure: Copper wire is used as the conductor, and the multi-layer structure combining a high-density braided shield and an aluminum foil shield is designed to suppress external electromagnetic noise. The cable sheath is made of PVC material. Compatible with condenser microphones, dynamic microphones, mixers, speakers, etc.: Can be used for wiring various XLR audio equipment, such as distributing signals from dynamic and condenser microphones, combining stereo outputs from mixers into mono inputs, and connecting to powered speakers and amplifiers. Before use, please check the following: Ensure that the XLR connector shape (male/female) and pin count (3 pins) match those of the connected device. This product can be used for both signal distribution and coupling, but when using phantom power, connect it appropriately according to the device's specifications. When inserting or removing the cable, hold the connector itself; do not pull the cable directly or bend it at a sharp angle.