Specification:
Brand new
Pattern: as shown in picture
Size: approx.0.5*2m
Thickness: approx.0.035mm
Water operation temperature: 25-35℃
Feature:
The pattern is not easy deformation.
Environment friendly, waterproof.
Not easy to fade.
Easy to use.
Can be use to auto accessories, electronic products, bedroom supplies, daily products, building materials etc.
Application range: can be applied to the surface of the materails such as hardware (brass, iron, aluminum, copper, etc.), wood, plastic (ABS, PU, PP, PE, PVC, etc.), stone, ceramic, glass, etc.
Water transfer process:
1. Base coating: mix well the paint obtaining the color that you need.
2. Film selections: select printing film that you need.
3. Place film: cut out the fit size, place it flatly on water surface.
4. Activation: spray the activator uniformly on the film after placing the film on the water 60-90 seconds.
5. Transfer: keep 35 degrees, with a fixture alignment film paper uniform downward pressure.
6. Soaking: about 30 seconds.
7. Washing: remove the remaining film.
8. Drying: remove the product' surface water.
Storage:
The film should be covered by plastic when store. A heavy / dark trash bag is perfect.
Film storage: 18-25°C
Optimum temperature: 21.5°C
Humidity: 45-65%
Do not open until ready to use to prevent contact with the air.
Water transfer printing film is a hygroscopic substance.
Do not store near water or in the room where your dip tank is located.
Avoid direct sunlight.
Package included:
1 x water transfer printing film
Note:
Please allow 1-5mm errors due to manual measurement.
Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same.
No-delivery refund
