Only Supporting systems: Windows XP/7/8/10 , Supporting MAC systems
Note: Before the user engraves, in the software settings, re-set it, then adjust the software parameters,and focus once before engraving.
Specifications:
Model：743115
Material: ABS(Acrylonitrile Butadiene Styrene plastic)
Laser Peak power: 3500MW
Laser Rated power: 3000MW
Input Voltage100-240V 50-60Hz
Output Voltage:5V/2A
Carving area: 80x80mm
Carving depth: 1mm
Color: Purple&Black
Size: 15x15.5x14cm
Power cord's length: 116cm
USB cable's length: 120cm
Applicable range: Plane surface
Only Supporting systems: Windows XP/7/8/10
Supporting image format: JPEG/ JPG/ PNG/ BMP
Can carve the following materials:wood, plastic, leather, etc.
Can not carve the following materials:Metal glass crystal etc.
Features:
* Made of hight quality ABS(Acrylonitrile Butadiene Styrene plastic),durable ,not easy aging.
* With cooling fan,can cooling the machine temperature,extend the service life.
* Laser focus knob,through rotation can adjust focus point to determine the precision.
* Comes with protective lenses, do not have to operate with glasses, more convenient.
Usage:
1: Connect the laser graver with computer.
2: Install the software.(see more details in the manual)
3: Open the software.
4: Choose or import a picture, edit it. Make sure the pic is in the mid of the engrave area.
5: Start engrave.
*Please connect the graver to computer before install the software, or the graver is unable to function correctly.
Package includes:
1 x Laser Engraver
1 x USB Disk
1 x Screw Driver
4 x Screws
4 x Screw Caps
1 x Power Cord
1 x USB Cable
2 x Wooden Board
2 x Paper Board
1 x Protective Lens
1 x Manual
Precautions for use：
1. First copied the compressed package in u disk to the desktop of computer,
2. Extract the folder, and then install the driver.
3. Connected the two lines of engraving machine ,open the software.
4. To the laser power, you must pull to the right to 100. Engraving time pulled to 60, need to focus before engraving.
Note:
1.Do not use the laser head to point at human or livestock,do not use laser to point at people’s eyes.
2.Laser has power.skin exposure to laser is strictly prohibited.
3.The caving machine should not be stopped while working，it will cause a damage.
4.Software only support Windows.
5.Metal, glass, crystal and transparent or translucent stuff are can not be engraved.slightly errored due to manual measurement. Your kindly understanding would be appreciated.
6.You might need to temporarily shut down the antivirus software before downloading the software.
7.Please according to the user manual to operate the machine. After 20 minutes of working, it need to take a break, can not work continuously for a long time.
No-delivery refund
