Type:Laser
Product name:3 in 1 IPL laser hair removal
Input Voltage:110-240V 50-60Hz
Wave length:470-1100NM
Light flashes:900,000 flashes
Energy:6-16.5J/cm2
Lamp:Quartz
Power:36W
Function:Skin rejuvenation lamp+hair removal lamp+FR lamp
FUNCTION INTRODUCTION：
Pulsed light：
IPL photons are synthesized based on the priciple of selective photothermal action a variety of therapeutic effects.lt can achieve the purpose of permanent hair removal,while improving the skin,high safety without side effects,painless.
High-grade quartz lamp：
Hith-grade quartz lamp material,integrated fiter UV,radiation the direct use of light to reach the hair follicle,blocking the other light vice dffect.
1-8 levels：
Select the appropriate level according to your skin tone。The level indicator light one light for one level,a total of 8 levels can be adjust.
900,000 Pulses：
Replaceable lamp,pulses times is not limited,Single time full body hair removal only about 2,000 pulses,it can be inhibited hair growth, the complete cycle ofjust 16,000 pulses or so.
Oversized treat area：
4.2cm*lrradiation area ,Enhance the overall efficiency of hair removal.a greater exposure to skin area
Full body hair removel used：
Suitable site:Hairline/Cheek/Lip/Back/Oxter/Chest/Arm/Abdomen/Bikini line/Thigh/Shank
destroying hair follicles by laser. It is fast, effective, safe, painless, and shrinks pores.
Automatic/Manual Mode：
The default mode is manual mode, Press the "fash button"for 2 seconds enter into auto mode!("A"appear), Press the "fash button"would retumn to manual model("A"disappear).
3 Cartridge interchangeable：
Skin rejuvenation lamp+hair removal lamp+FR lamp
Packing list：IPL Machine*1，Power adapter*1.Instruction manual*1，razor*1，glasses*1，interchangeable cartridge*2
The working principle of the hair removal instrument: irradiate the hair folicle by emiting photons.After a period of iradiation, the hair follicle will gradually shrink and eventually achieve the purpose ofpermanent hair removal. The instrument is for the hair follicle, not for the hair, but for the hair folicle. Noeffect when use at the beginning.You need to follow the procedure for more than 20 days to see slowhair growth. Generally, 3-4 months of inspection can achieve long-term hair removal.
How to use.
1. Before use, clean up the body hair on the hair removal area to prevent the surface hair from absorbing heat and affecting the hair removal effect.
2. After shaving the hair, it is recommended to use the epilator after an interval of 6 hours and after observing no red and itchy symptoms, the skin should be kept dry, do not start using the epilator after taking a shower.
3. Do not apply any moisturising products before using the hair removal device to keep the skin surface dry and to avoid damage to the device.
4. choose the mode of hair removal, for the first time it is recommended to choose the low and mild mode to build up tolerance, and then slowly adjust according to your own acceptance.
5. 1-4 weeks, 1-2 days use once; 5-8 weeks, 2-3 days use once; after 8 weeks use 1-2 times a week
6. For small area hair removal, you can use single flash (contact with skin will not automatically emit light, you need to press the light button), for large area, please adjust to continuous light (hair removal instrument contact with skin automatically emits light)
Note:
1, Keep the skin dry and clean before using the instrument. it is forbidden to use aloe vera gel, body milkand other liquids before use it, which wil cause the instrument not to shine, Use the aloe vera gel formaintenance after 1 hour of use.
2 Start with low gear and find the gear that suits you.
Frequency: 50–60 Hz
Voltage: 110–240 V
No-delivery refund
