Features:
1.Smart IC Compatibility:Supports a variety of smart ICs, including WS2812B, SK6812, and SK9822.
2.Long Control Distance:Enjoy a 10-meter remote range for easy setup and adjustments.
3.Wide Voltage Range:Supports DC5V~24V, ensuring compatibility with various LED light strips.
4.User-Friendly App:Control your lights with ease using the intuitive App interface.
5.Bluetooth Music Control:Seamlessly syncs with your music via Bluetooth for a dynamic lighting experience.
6.Support setting pixel number and segment number, support up to 960 pixels;
7. With18 kinds of LED strip music effects, 30 kinds of LED matrix music effects and 180 kinds of non-music effects;
Specifications:
Working Voltage : DC5V~24V.
Working Current : 18mA~45mA.
Audio Input:There are two ways to input the audio signal on SP107E, AUX IN and Build-IN microphone;
1.AUX IN: Plug the supplied audio split cable into the “AUX IN” jack, connect the audio output
source(MP3,Phone or tablet…)and the speaker(or headset), controller will automatically switch into AUX input mode;
2.MIC: Disconnect the audio cable, controller will automatically switch into microphone input mode.
Cautions:
1.The controller can support DC5V~24V, but it cannot regulate the iutput voltage at the VCC. That means the output voltage of your power supply must be the same as the work voltage of your led lights. If the work voltage of your LED Light is 5V, please use a 5V power supply, NEVER use a 12V or 24V power supply. Otherwise, the entire LED light will be destroyed.
2.Please use a power supply not a battery to power the controller. The output power of power supply must be more than the max power of led light. For example, if the work voltage and max amp of your led light is 5V 10A 50W, power supply output must be 5V 10A 50W at least. Otherwise, it won't work smoothly.
3.The controller only supports LED lights with smart IC. It cannot support ordinary RGB/RGBW LED strip without IC.
What can you do if you can't make it work?
1.Please check your smart phone and led lights and confirm whether they can support the controller. Your smart Phone should be IOS 10.0 or Android 4.4 or later version.
2.Please check output voltage and amp of your power supply and confirm whether it matchs controller and led lights. If your led light is 5V, please use 5V power supply. Never use 12V power. Otherwise, the led lights will be damaged.
3.If the power supply, controller and led lights can be compatible with each other well, please connect them and set up again following the connection and setting instructions above.
The merchant warrants that their products comply with all applicable laws, and are offered only if they comply with Joom’s policies and EU Product Safety and Compliance laws.
No-delivery refund
