G10 Hud Gps Head Up Display Speedometer Overspeed Led Monitor Windscreen Projector With Overspeed Alarm Digital Clock

Feature:

1. Complete functions, can display: speed, time, travel time, travel distance, 0-100km acceleration time, altitude, longitude, latitude, driving direction (angle), with speeding alarm and fatigue driving reminder. 2. Every inch is meticulously crafted with seamless snap-fit technology to make the G10 more beautifully shaped.

Description: Name: Car Head Up Display

GPS Speedometer: G10 Display function: 1. Multi-function display: time, travel time, travel distance, number of satellites, acceleration time, longitude, latitude Dial the dial left or right to switch 2. Function icons: fatigue driving, driving time, clock, acceleration time, direction angle, longitude, latitude, driving distance, altitude 3. Speed progress bar 4. Speed display 5. Overspeed alarm icon 6. Vehicle Speed Unit MPH Miles km/h Kilometers Compass: Number of Satellites Icons: 7. The compass can only be used normally after it has found satellites, N North E East W West S South 8. The GPS satellite icon stops flashing before it can be used normally 9. Number of satellites

Dial key function: 1. Vertical short press (click and release the dial): switch the display mode (confirm the option after entering the setting menu) 2. Long press vertically (press and release the dial for 2 seconds): enter the setting menu, after adjustment, press and hold vertically for 2 seconds to save and exit 3. Dial left: switch clock, driving time, acceleration time (move options after entering settings) 4. Long left dial: long left dial for 2 seconds, heard Didi turn off the buzzer alarm, dial left again for 2 seconds to hear Didi turn on the buzzer 5. Dial right: switch driving distance, altitude, longitude, latitude (move options after entering settings) To enter setup mode: Long press the dial button vertically for 2 seconds to enter the setting item, dial the dial wheel right to select the menu, press the vertical short press to confirm, after adjustment, press and hold vertically for 2 seconds to save and exit

GPS Display FAQ: 1. There is no display on the screen, no power Check whether the USB cable is damaged, replace the USB cable for testing, and prohibit using a voltage higher than 5V for power supply 2. No speed When the power-on satellite icon flashes, it indicates the star search state. Move the car to an open road. After the satellite icon stops flashing, it can be used normally. 3. Time calibration After the satellite icon is flashing and the satellite is found, enter the 8th item of the setting item to adjust the calibration local time, 3. The speed is not allowed Check whether the unit is correct, km KM/mile MPH, (speed unit switching reference setting item) When the car leaves the factory, the manufacturer increases the speed displayed on the dashboard by 5-7%. The international standard is based on satellite data. Fine-tune the vehicle speed, such as the meter displays 100 Km/h, the machine displays 105 Km/h, adjust the parameter value to 102 4. The driving direction is displayed incorrectly When there is no vehicle speed, the satellite cannot identify your driving direction, and it can be displayed normally only after the vehicle speed exceeds 5KM/H 5. The speed is still displayed after the car stops Underground parking lots, tunnels, under overpasses, when there are obstructions, the signal will be unstable and the satellite will drift. Please drive the car to an open road 6. Turn off the buzzer Turn the wheel to the left for 2 seconds to turn off the buzzer, turn the wheel to the left for 2 seconds to turn on the buzzer

Special reminder: The working voltage of this product is 5V, and it is forbidden to use a voltage higher than 5V for power supply After the power is turned on, the satellite icon flashes to indicate satellite search, and the GPS satellite icon stops flashing and displays more than 5 satellites before it can be used normally.

Packing list: 1 x host 1 x usb cable 1 x double sided adhesive tape 1 x suction cup bracket 1 x instructions Note: 1. Due to manual measurement, please allow 1-3cm error. Make sure you don't mind before bidding. 2. Due to the difference of different monitors, the picture may not reflect the actual color of the product. Thanks.