About this item:
1.Warmer handle: having 3 gears to choose: high / off / low
2.Hot handlebar: easy to install, wide range of application
3.Motorcycle hand grips: with low (about 50c) / off / high (about 70c), you can adjust the handlebar's temperature.
4.Hot handlebar for motorcycle: easy to install and has comfortable touch feeling.
5.12v warmer handle: this product high temperature is about 75 degrees, low temperature is about 50 degrees
Six design highlights:
【1】 The wire does not rotate with refueling, resulting in a longer and more convenient service life;
【2】 No sliding contacts, spring powered technology, and more flexible rotation of the handle during refueling;
【3】 Hand handle integrated injection molding, waterproof and dustproof, longer service life, and safer;
【4】 One handle is suitable for 22mm and 25 direction models;
【5】 Split single and dual 360 degree throttle design;
【6】 The electric handle model is designed for universal use and is suitable for a wider range of vehicle types.
Product selling points:
【1】 Installation is super simple: After installing the throttle, align the lead elbow of the right-hand handle with the throttle cable post and insert it. Gently tie the elbow and cable post together with zip ties. Improve the problem of too many old accessories and complicated installation.
【2】 Pioneering anti-slip ring: Adopting anti-slip ring to prevent the handle from slipping out, it is more flexible because it does not rotate eccentrically. Improve the old model by fixing the handle with an iron ring. Loose screws can easily come out, and tightening the screws can cause eccentricity and result in inflexible rotation.
【3】 Aluminum ring clamp fastening: Use your left hand to fix the aluminum ring clamp more firmly. Exercise is safer. Improve the old model by using iron rings to fix and easily sway.
【4】 The wire does not rotate with refueling: the heating wire on the right hand is powered by a spring between the heating wire and the power supply wire, and all joint welding points are soldered to ensure waterproofing and corrosion resistance.
【5】 Ultra-thin turntable: The left and right handles of the turntable are thinner and more aesthetically pleasing, making it easier to honk.
Installation method:
【1】 Install the fuel dispenser into the throttle seat: Install the fuel dispenser into the throttle seat, hang the throttle cable, and close the cover. Then insert the right handle into the fuel dispenser and rotate it to check if it is flexible. If it is not flexible, polish the fuel dispenser.
【2】 Insert the right handle into the Yamaguchi oil dispenser: Coarse positioning: Align the anti-rotation elbow of the right handle with the throttle cable column or other position basin on the front of the car, insert the right handle so that the elbow rests on the cable column, and mark it to enter the position cover. Precise positioning: Try inserting multiple times into the marked tooth slot to ensure that the bend does not rotate and the angle is moderate without affecting the vehicles refueling. The right handlebar design has a clearance angle of no more than 120 degrees, usually adjusted to 75-90 degrees to meet the refueling needs of the vehicle. The step angle of the tooth groove is 15 degrees
【3】 Install the anti-slip ring into the throttle seat. Insert the right handle into the fuel dispenser to the bottom. The anti-slip ring must be installed into the throttle seat! The anti-slip ring is used to prevent the right handle from coming out of the fuel seat and causing safety accidents. The shell of some scooters may be inserted between the right handle and the fuel dispenser, and the anti-detachment ring cannot be installed in the throttle seat. It is necessary to apply 502 glue at the connection between the fuel dispenser and the anti-detachment ring to prevent the right handle from coming out. Immediately invert the right handle after dripping glue to prevent it from flowing into the handle and affecting its rotation.
【4】 Tilt installation prolongs lifespan: Tilting the left switch to allow rainwater to flow out can extend the lifespan of the switch. Poor contact of the switch can cause gasoline to drip and repeatedly press. Use a blade to remove the button and scrape off the rust on the contacts, then clean them with gasoline.
【5】 DC powered vehicle connection: The characteristics of DC powered vehicles are that the headlights are powered by the battery. Shirong held the black wire as positive and connected it to the 12-volt positive wire locked out by the faucet. The line must be able to turn off the power when twisting the faucet lock. If the power cannot be turned off, forgetting to turn off the handle switch will deplete the battery's stored energy. Connect the green wire of the handle to the negative pole of the vehicle's grounding.
Specifications:
Product Name: 2014 Upgraded Electric Hand Handle
Product Model: CS-203A1
Net weight of product: 248g
Product gross weight: 326g
Packaging method: Color box packaging
Packaging size: 19.7x12x6.5cm
Product Material: TPU+ABS
Product Color: Black
Handle Length: Left Hand Handle: 14cm Right Hand Handle Length: 14.7cm
Installation handle diameter: 22mm
Applicable voltage: DC12V
Product power: 25W [Power per pair]
Switch type: Three adjustable switches
Product accessories: A pair of left and right handles, 1 throttle card
【 Applicable models 】: Suitable for motorcycle handlebars with a diameter of 22mm
Package List
2 Pairs x hot handlebar
No-delivery refund
