About this item:
1.The product comes with reverse connection protection and surge protection, so even if it is reversed, it will not burn out
2.The product is made of pure rubber PVC fabric, which is waterproof, wear-resistant, tear resistant, anti-folding, anti-aging, water and alkali resistant, and can greatly increase the service life
3.The product switch is equipped with an intelligent temperature control chip, which can adjust temperature in five levels. Intelligent temperature control is more convenient and can be adjusted to the corresponding temperature according to personal preferences
4.The product heats up quickly, quickly within 10 seconds, and has a large heating area
The heating element of the product is fixed with straps, which is convenient and fast, does not damage the handlebar, and has an overall beautiful and elegant appearance
5.The product adopts IP67 waterproof rating, which can work normally even if the switch and handle cover are soaked in water. When the handle cover needs to be cleaned, simply unplug the plug and it can be washed with water, which is very convenient.
6.The back of the heating element of the product adopts anti slip texture design, which is anti-slip and wear-resistant, and can be used better without worrying about the throttle rotating with the handle sleeve
Wiring method:
【1】 The red wire of the product is connected to the positive pole of the battery, and the black wire is connected to the negative pole of the battery.
【2】 If the original car has an SAE plug, you can directly plug the SAE plug from the product line into the SAE plug of the original car for use
Operating instructions:
【1】 When the input voltage is less than 11.7V, do not turn on the device; Input voltage<12.2V, LED light flashes for 5 seconds (1hz 50%) and shuts down.
【2】 Working status: indicator light constantly on (first gear: red constant on, second gear: orange constant on, third gear: yellow constant on, fourth gear: green constant on, fifth gear: blue constant on)
【3】 Click on the key: Switch gears
Special attention:
【1】 Please choose the appropriate gear according to the ambient temperature. Under low temperature conditions, if the temperature of the electric handlebar cover cannot be accurately sensed in a timely manner due to stiff hands, please use the low or medium gear first to prevent high temperature burns.
【2】 This product is only suitable for motorcycles with 12V voltage. Before installation, please confirm the voltage of your vehicle and carefully read the installation diagram. Incorrect voltage and wiring can cause component damage.
【3】 This product can only be installed on the handle of a motorcycle and powered on. Before installation, the battery can be used to test whether the product is correctly powered on.
【4】 It is strictly prohibited to work with electricity (empty burning) when not riding, in order to prevent the electric handlebar cover from overheating and damaging the original handlebar.
【5】 It is recommended to connect the door lock wire for wiring. Most car models have a black positive pole and a green negative pole. It is recommended to use a multimeter to measure the specific situation.
Specifications:
Product Name: 12V strap style anti slip strap waterproof switch five level heating electric handle cover
Product Model: CSZH-1314A1
Net weight of product: 220g
Product gross weight: 395g
Packaging method: Color box packaging
Packaging size: 17.3x13.3x7cm
Product Material: Fabric: Pure rubber PVC strap: Polypropylene heating element: Metal heating film
Product Color: Black
Product size: Length: 10.5cm; Width: 9.5cm
Strap size: 64cm
Input voltage: DC12V
Working voltage: DC 12.2V (This product comes with anti-loss protection, below 12.2V, the product cannot be used)
Product power: First gear (red): 28W; Second gear (orange): 22W; Three levels (yellow): 15W; Fourth gear (green): 12W; Fifth gear (blue): 9.5W (the above data are all obtained from experiments, and the specific values may fluctuate slightly due to objective factors such as voltage and environment)
Working ring mirror temperature: -20 ° C -+50 ° C
Product line with fuse blade: 5A
Product line length: The heating element comes with a built-in line length of 11cm; Switch connection wire: 126cm; Tail end SAE interface power cord: 43cm (manually measured, there may be some error, please refer to the actual measurement)
Product accessories:
3M adhesive * 1, zip ties * 5, stainless steel L-shaped bracket * 1, zip ties * 2
Installation method: 3M adhesive fixation, L bracket mirror holder fixation
No-delivery refund
