About this item
1.UNIVERSAL FIT: wide compatibility, from 3.5" to 6.5" size phones. Fit for motorcycles, ATVs, Scooters and Mopeds.
2.SECURE & SHOCK ABSORBING: X type claws design to hold the phone extremely tight, rubberized claws and elastic fixer can absorb strong shock.
3.360° ROTATION & INSTALLATION: two 360° link points, ensure you can adjust to the best angel and position. Easy to install through rear mirror lever without extra screws.
4.SPEED USB CHARGER: input: 9 ~ 24 V, output: 5V, 2A. Blue light while in use, with switch at the USB port to save power, and with a waterproof cover.
5.ACCESSORIES: two anti-slip pad and two back-up claws are included.
Product description
1.This holder has wide compatibility, suitable for phones from 3.5" to 6.5". In addition, it can be suitable for most motorcycles, ATVs, scooters and mopeds.
2.X-type claws to hold the phone extremely tight, plus the elastic fixator to ensure your phones will not fall off, on the other hand, rubberized claws and elastic fixator can absorb strong shock to protect your phones.
3.There are two 360° bonding points to make sure you can adjust to the best angel and position.
4.It is easy to install through the mirror lever with a diameter of 8~10mm, and installation does not require additional screws.
5.USB speed charger with 9-24V input voltage, and output for 5V, 2A. The blue light is on during use and can be turned off to save energy. With a waterproof cover at the port.
6.Two non-slip pads and two recoil claws are included in the package.
Product advantages:
【1】 The input voltage is 12V-30V, and it automatically shuts off when it reaches 30V, without burning out the equipment! Safe and reliable
【2】 With a USB interface and switch, it truly achieves dual performance of a product, without worrying about the phone running out of battery
【3】 The motorcycle rearview mirror handle can be fixedly installed, with simple operation
【4】 The anti-skid rubber four feet are used to protect the phone more safely. The back part of the phone is covered with foam cotton and memory material patches to give the phone more exquisite enjoyment
【5】 Adopting engineering bone rotation method, the bracket can rotate 360 °, just to reduce your visual fatigue and arm soreness
Specifications:
Product Name: Mirror holder hexagonal X-shaped phone holder charging blue light
Product Model: CS-330H1
Net weight of product: 255g
Product gross weight: 300g
Product Material: ABS material+aluminum alloy
Packaging size: 13.5 * 9.8 * 8.4cm
Input voltage: 12V-30V
Output voltage: 5V
Output current: 2A
Product line length: 135cm
Maximum range: 3.5-6 inches
Applicable vehicle model: 12V motorcycle
Installation method: First, unscrew the rearview mirror on the motorcycle handle, then pass the hole on the product bracket through the mirror handle, and fix it in place
Wiring method: Connect the red wire to the positive pole of the power line, and connect the black wire to the negative pole of the power line
No-delivery refund
