NOTE :
1. The ideal speed of is 50KM/H, but the actual speed will be affected by other factors such as the site. The actual speed of is about 35KM/H.
Please note when using the battery：
After receiving the product, please remove the battery and charge it, and then use it after charging.
1. When the battery is dead, it must be charged in time to ensure that the battery has surplus power. If the battery is completely empty, the battery will not be able to charge
2. When charging the battery, disconnect the connection from the remote control car. Be sure to take the battery out to charge it separately
3. If you do not use the remote control car, please disconnect the battery from the wire of the remote control car, absolutely do not connect, and fully charge the battery, otherwise it will damage the battery
We recommend： that you watch the video and read our description carefully before you buy
Size：33.5*15.5*9.5 CM
Maximum speed：50KM/H
Battery：7.4V 1300mAh
Driving motor：RC390 high speed bearing carbon brush strong magnetic (magnetic protection + heat sink) motor.
Working time：15-18Mins
Features
1. The simulation structure design is adopted, which has the control feeling of a real car, and realizes full-scale continuously variable speed change, high-speed driving, rapid acceleration, deceleration, braking, reversing, left turn, right turn;
2. Applicable sites: flat roads, concrete roads, tarmac, race tracks.
3. Devil's Angel Eye seven mode function: Devil's Angel Eye running light, Devil's Angel Eye constant light, Devil's Eye constant light, Angel Eye constant light, Devil's running light, Devil's Angel Eye breathing light, turn signal (front and rear with the same flash).
4. 4WD: front and rear upright spring damping, double-wishbone independent suspension system.
5. 2.4G full-proportional synchronized remote control system. Full proportional throttle/steering.
6. 2.4G splash-proof four-way 30A integrated ESC/receiver.
7.Front wheel cross ball joint drive shaft, rear wheel split dog bone drive shaft.
Five-wire 17G servo.
8.Super battery power: 7.4V, 18650-1300mAh Li-ion battery, discharge multiplier 10C (T plug).
9.16 ball bearings throughout the vehicle.
10.Metal second floor plate, metal front and rear arm code, metal mid-drive shaft.
shell using high tenacity explosion-proof PVC shell.
11.Simulation of sports car tires, strong grip.
12.Equipped with a set of drifting wheels (4), available for players to enjoy the fun of drifting.
13.Power board reserved for two power ports for consumers to upgrade other accessories.
Q&A
Q1: Why are the tires of the remote control car exposed?
A: [Special design] The toe grip is strong and not easy to drift, which helps to improve the stability of the body and the grip of the tire when cornering.
Q2: How to adjust the tire inclination of the remote control car?
A: It can be adjusted by the fine adjustment and throttle fine adjustment buttons of the remote control.
Q3: What should I do when my remote control cannot be connected to RC?
A: Please make sure the battery is fully charged. Then manually pair the toy car and the remote control, you can also refer to the user manual for details on matching the toy car. You can test the voltage of the motherboard so that you can analyze what the problem is.
Q4: What should I do when the toy car can turn and cannot move forward or backward after my remote control is connected to RC?
A: Please first determine whether the battery is fully charged, and then test the motherboard and motor voltage, so that you can analyze what the problem is.
No-delivery refund
