Dual Power Automatic Transfer Switch DIN Rail Mount 4P Generator Changeover Switch AC400V 63A

Feature: 1. MAIN FUNCTION: Dual power automatic transfer switch, mainly used to test whether the main power supply or standby power supply is normal to ensure continuity, reliability and security. 2. PLASTIC HOUSING: The transfer switch housing is made of PC plastic, flame retardant, high temperature resistant, has good insulation, silver contacts greatly improve electrical conductivity. 3. EASY OPERATION: The transfer switch supports manual and automatic operation, millisecond switching without power failure, reliable transmission, easy installation and maintenance. 4. DIN RAIL MOUNTING: The automatic transfer switch adopts 35mm standard DIN rail installation method, suitable for PZ30 distribution boxes, with stable structure and wide application range. 5. APPLICABLE RANGE: Suitable for emergency power supply system with 50 or 60 Hz AC220V, used in factories, shopping malls and other places where continuous power outages are not allowed. Specification: Item Type: Automatic Transfer Switch Material: PC, Silver Rated Current Le: 63A Level: PC Level Specification: 4P Service Life: Electrical: 2000 Times; Mechanical: 5000 times Rated Short Circuit Current: 50kA Fuse: RT16-00-63A Auxiliary Circuit: 2 relays, each with 2 sets of contact capacity, AC220V50HZ le=5y Touch Time: <50ms Operation Switching Time: <50ms Return Time: <50ms Closing Time: <50ms Installation: 35mm Standard DIN Rail Package List: 1 x Automatic Transfer Switch 1 x User Manual Note: 1. The maximum ambient temperature shall not exceed 40℃, the minimum temperature shall not be lower than ‑5℃, and the average temperature within 24 hours shall not be higher than 35℃ 2. The altitude of the installation site should not be higher than 2000m 3. When the maximum temperature reaches 40℃, the relative humidity of the installation site should not exceed 50%; When the temperature is the lowest temperature ‑5℃, the relative humidity is higher, for example, when the temperature is 25℃, the relative humidity is 90%. Due to temperature changes, special measures should be taken to deal with occasional condensation on the surface of the product.