Peiiwd Turntable Cartridge Replacement Stylus Atn3600l Audio Technica At Lp60 Xbt Lp3 Pl300 Kd291r Lp Vinyl Phonograph Record Player Cartridge Stylus

Product description

turntable cartridge replacement stylus LP vinyl gramophone record player cartridge stylus for AT-LP60 XBT LP3 PL300 KD291R

FEATURES:

brand new and high quality

NOTE:

Non-original stylus, no logo, don't shoot if you care

To remove the old stylus (needle), hold the cartridge in one hand, grab the plastic stylus housing with your thumb and forefinger, and pull it out of the cartridge. The stylus assembly will come off when it is slightly apart To install the replacement stylus, insert the new stylus assembly into the cartridge at a slight angle so that the hook on the end of the stylus fits into the slot on the cartridge body. stylus assembly There are 4 wiring marks on the end of the singing head: R+, R-, L-, and L-. Generally, the color of the wire at the end of a record player is r+ = red, R = green, L+= white, and L = blue.

Recommended needle press range: 1.5g to 2g, can be adjusted according to your preferences.

replacement stylus only Demonstrations of other accessories shown in the pictures are not included.

SPECIFICATIONS:

Item Type: Replacement Stylus

Material: plastic

size: tail height:5mm/0.19", width:6mm/0.23"

color: white

Output Voltage:4.2mV

Frequency Response: 20Hz-20Khz

2 Channel Separation: 1kHz/10kHz: 24/15dB

Tracking Force: 1.5g-2.5g (adjustable according to requirements)

turntable models available on the market: (especially) for AIWA PXE860, Aiwa PX-E860 PXE880 PX-E880 for LP60 USB/LP60/AT-PL50/LP2DA/LP2DUSB, Crosley CR249 for DP 29F, SO-ny PS-LX250H, Teac P988/ for P-A688

quantity: 1 piece

INTERCHANGEABLE STYLUS MODEL:

for AT3601/AT3650/AT3651/AT91, ATN200, ATN2002, ATN2003, ATN2004, ATN2005

for AN11

for Akai — RS82, APN1

for Daewoo Darling — DL32E

for DN235

for Cymban — HT302 B

for ST7

for JVC — MD1055Z/MD1055E, DT55, DT55/ II, DT55B for 25130071

for EPS43ST

Note: Don't shoot with a non-original stylus, no logo, if you care.

replacement stylus only Demonstrations of other accessories shown in the pictures are not included.

To remove the old stylus (needle), hold the cartridge in one hand, grab the plastic stylus housing with your thumb and forefinger, and pull it out of the cartridge. The stylus assembly will come off when it is slightly apart

Recommended needle press range: 1.5g to 2g, can be adjusted according to your preferences. To install the replacement stylus, insert the new stylus assembly into the cartridge at a slight angle so that the hook on the end of the stylus fits into the slot on the cartridge body. stylus assembly

To request a return or exchange, please note that it is mandatory to provide a video of the unpacking of the package.