Features:
- brand new and high quality
- Made of high quality materials, and practical
- Function Mode Selection: Default is Mode 1:
- That is, the pads 123 are not soldered, OPT1 OPT2O PT3 is: 111
- do not solder - 1 for soldering to 0
- Mode OPT1 0PT2 OPT3 Dimming
- The default is high level 1 when the pad is floating, and low level 0 when the pad is shorted;
- Brightness memory does not refer to power-off memory, it means that after the module is powered on, the touch switch process has brightness memory; when the module is powered off, the brightness will return to the default state:
- Application scenarios: wardrobe cabinet lights, display cabinet lights, LED hard light strips, light strips, aluminum trough lights, touch eye protection table lamps, etc. (Material for panels: insulating materials, , ordinary glass, tempered glass, plastic, wood, paper, stone, etc.)
Product parameters:
- Input voltage DC5V-24V (recommended 12V) output voltage equal to input voltage
- Load power 72W(MAX)
- Load current resistive 3A(MAX)
- Standby current 10-15mA
- Standby power consumption ~0.01W
- Working temperature -25°C-85°C
- Output frequency 32KHZ
- Product weight ≈15g
- Product size: length 42 width 12 height 14 (MM)
Kind tips:
- The input voltage cannot be lower than 5V or higher than 24V, 12V is the best.
- The load power cannot be higher than 72W, otherwise there will be induction and the load will not act.
- Do not reverse the input and output, IN is input, OUT is output, otherwise it will burn out the circuit.
Package Included:
1* LED Capacitor Module Touch Switch
Notes:
1. Due to various factors such as display brightness and light brightness, the actual color of the product may be slightly different from the website picture.
2. Please allow a slight deviation between the data and the manual measurement.
No-delivery refund
