Archiss Microphone Stand Microphone Boom Arm Low Profile Compatible AS-MBA01

Ships from Japan [Mic boom arm makes recording and broadcasting more comfortable] The microphone boom arm is an arm that raises and secures the microphone above your desk. This helps reduce noise from vibrations on the desk. You can adjust the length and angle of the arm, so you can freely decide the position of the microphone. It can be folded compactly when not in use, making it convenient for storage. [Low profile design makes your desk area neat] The arm is only 15mm thick, so you can take the microphone out from under the monitor and it won't obstruct the area in front of the monitor. The dead space under the monitor can also be used effectively. If you attach the included pole, you can also hang a microphone from above. [Freely adjustable range of motion to achieve optimal position] With 3 joints that rotate 360° horizontally, you can position the microphone from any angle. When the arm is extended, the maximum length is approximately 709 mm, and the height can be adjusted from approximately 144 to 706 mm. [Ball Head] Ball head allows you to precisely adjust the position of the microphone. [Compatible with various microphones] Compatible with 3/8 and 5/8 inch microphone mounts, so it can be used with a variety of microphones. Maximum load capacity is 2kg. [Supports two fixing methods: clamp and grommet] You can choose the most suitable fixing method according to the thickness and material of your desk. [Cable management convenient for cable management] Cable management makes cable management convenient. By hiding the cable inside the arm, it can be stored neatly. Record and broadcast comfortably with the 2-height adjustable microphone boom arm. ARCHISS AS-MBA01 is low profile compatible and makes your desk area neat. Compatible with both clamp and grommet methods, so it can be attached to a variety of desks.