SANEI Shower Head Water Saving Shamosy with Low Water Pressure Shower Board Blue PS3963-80XA-CB6

---------------------------------------------------------------------- 【JOOM Approved! Sold & Shipped by Trusted Japanese Sellers】

🔹 Operated by Verified Japanese Sellers – Approved by JOOM, our experienced Japanese sellers provide reliable service. 🔹 Direct Shipping from Japan – Carefully packed and promptly shipped straight from Japan. 🔹 Japanese-Standard Quality Control – Strict inspections ensure only high-quality products reach you. 🔹 About Included Manuals – If a manual is included, it will primarily be in Japanese. We recommend using image translation apps if needed. ---------------------------------------------------------------------- It is ultra-thin and lighter than previous models, and the head part acts as a grip to prevent accidental dropping. It has a water saving effect of approximately 30%. If you are using it in a home with low water pressure, you can replace it with the built-in low water pressure shower board to increase the power of the water. ・SANEI ・TOTO ・other than LIXIL (INAX) balance pots ・KAKUDAI ・TBC ・YUKO ・Some products from Mizutani, Noritz, and Osaka Gas ・Some products from MYM ・KVK ・MYM (thick hose) ・Gastar (Tokyo Gas) ・LIXIL (INAX) balance pot ・Some Rinnai products ・Some Rinnai products・Some products from Mizudani, Noritz, and Osaka Gas (if they cannot be installed as is) ●Manufacturer: Sanei Faucet Manufacturing Co., Ltd. ●Model number: PS3963-80XA-CB6 ●Product name: Water-saving shower head ●Series name: shamozy ●Shower supplies ●For bathroom ●Material: Shower head/ABS resin, adapter/polyacetal ●Color: Skeleton blue ●Accessories: Low water pressure shower plate, shower head adapter set 3 (T250-3, T250-7, T250-8 types) 《Water pressure conditions》 ●Water supply/hot water supply pressure (MPa): ・Minimum required water pressure/0.05 (flow pressure) ・Maximum water pressure/0.75 (hydrostatic pressure) [Note] *The maximum operating temperature of the shower head is 60℃. *Regular inspections and parts replacement are required to maintain faucet performance. As a guideline, worn out parts should be replaced every 5 years, and check valves should be inspected and replaced every 3 to 5 years for safety reasons. *If the water/hot water supply pressure exceeds 0.75MPa, reduce the pressure to around 0.2~0.3MPa using a commercially available pressure reducing valve. *Make sure the water supply pressure is higher than or equal to the hot water pressure. *Make sure the water supply/hot water supply pressure is 0.05MPa or higher.