Dishwasher Safe Made In Japan Hinoki Cutting Board with Stand 39cm 39 X 24 X Mainaita Cutting Board Hinoki [Hinoki] 1.3cm [Wooden Hinoki]

[Size] Approximately 39cm x 24cm x thickness 1.3cm Dishwasher safe [Material] Body: Hinoki Side coating: Urethane resin coating [Made in Japan] [Wooden] Dishwasher safe [Features] - Hinoki cutting board that is dishwasher safe. - Comes with a convenient stand that can be rotated to stand upright, so you don't have to worry about where to store it. - Urethane resin coating is applied to the sides that are prone to water seepage and dark stains, which prevents water from entering and dries quickly to prevent dark stains. ・Applies "warp prevention processing" to suppress warping. [Care] - After use, wash away dirt as soon as possible, wipe off moisture, and dry thoroughly before storing. Leaving it wet may cause mold. - When washing in the dishwasher, please rinse dirt off both sides with water before putting it in the dishwasher. If you pour hot water on the cutting board before washing, the protein from fish or meat remaining on the cutting board will solidify, making it easier for odors to remain. - If washing by hand, use a soft sponge or natural scrubbing brush with dish detergent. If you use a metal scrubber, etc., there is a risk of scratches. ・Using bleach may react with wood components and cause black or brown stains. Be sure to dilute kitchen bleach according to the instructions. Please test it in an inconspicuous place before use. After cleaning, rinse thoroughly to ensure that no ingredients remain. Please do not use foam-type bleach. - If the screws on the stand part become loose or tight, please adjust them with a Phillips screwdriver. However, if you use a screwdriver that does not fit the screw threads or force it to turn, the screw threads may become flattened and become unable to turn. [Precautions for use] ・Please refrain from using it for purposes other than its intended purpose. - Lightly wet with water before use to prevent food color and odor from sticking. ・Please use the stand so that it is perpendicular to the cutting board. ・If strong force is applied to the stand, the joints may become distorted or deformed. ・When storing the cutting board or setting it up on a stand, be sure to wipe off any moisture on the cutting board. - When washing in a dishwasher, do not place it near hot air outlets. High-temperature hot air may cause warping or cracking. Please avoid drying in direct sunlight. ・Hinoki contains a lot of tar, and when it is sealed or hot, it may come to the surface and cause stains and stickiness. No harm to the body. Wipe it with alcohol. [Features] - Hinoki cutting board that is dishwasher safe. - Comes with a convenient stand that can be turned to stand upright, so you don't have to worry about where to store it. - Urethane resin coating is applied to the sides that are prone to water seepage and dark stains, which prevents water from entering and dries quickly to prevent dark stains. ・Applies "warp prevention processing" to suppress warping. [Care] - After use, wash away dirt as soon as possible, wipe off moisture, and dry thoroughly before storing. Leaving it wet may cause mold. - When washing in the dishwasher, please rinse dirt off both sides with water before putting it in the dishwasher. If you pour hot water on the cutting board before washing, the protein from fish or meat remaining on the cutting board will solidify, making it easier for the odor to remain. - If washing by hand, use a soft sponge or natural scrubbing brush with dish detergent. If you use a metal scrubber, etc., there is a risk of scratches. ・Using bleach may react with wood components and cause black or brown stains. Be sure to dilute kitchen bleach according to the instructions. Please test it in an inconspicuous place before use. After cleaning, rinse thoroughly to ensure that no ingredients remain. Please do not use foam-type bleach. ・If the screws on the stand part become loose or tight, please adjust them with a Phillips screwdriver. However, if you use a screwdriver that does not fit the threads or force the screws to turn, the threads may become flattened and the screws will not turn. [Precautions for use] ・Please refrain from using it for purposes other than its intended purpose. - Lightly wet with water before use to prevent food color and odor from sticking. ・Please use the stand so that it is perpendicular to the cutting board. ・If strong force is applied to the stand, the joints may become distorted or deformed. ・When storing the cutting board or setting it up on a stand, be sure to wipe off any moisture on the cutting board. - When washing in a dishwasher, do not place it near hot air outlets. High-temperature hot air may cause warping or cracking. Please avoid drying in direct sunlight. ・Hinoki contains a lot of tar, and when it is sealed or hot, it may come to the surface and cause stains and stickiness. No harm to the body. Wipe it with alcohol. [Size] Approx. 39cm x 24cm x Thickness 1.3cm [Material] Main unit : Hinoki Side coating: Urethane resin coating [Made in Japan]