100W Nail Art Tools Cleaning Machine Heating High Temperature Cleaning Tool with Quartz Beads

Feature： 1. Special designed for cleaning nail tools, it has good cleaning effect. 2. High temperature inner tank, tools can be cleaned comprehensively, quickly and efficiently. 3. Multiple heat emission hole, considerate designs, extend the service life of the machine. 4. Equipped with a bag of cleaning beads, can help a lot for tools cleaning. 5. Made of quality ABS material, safe and eco‑friendly, simple and elegant appearance, beautiful and practical. Specification： Condition： 100percent Brand New Item Type： Nail Art Tools Cleaning Machine Material： ABS Color： Black Liner Volume： Approx. 4 x 7cm 1.6 x 2.8in (Diameter x Height) Overall Height： Approx. 15cm 5.9in Power： 100W Features： 1. Automatic temperature： 200 celsius . 2. Stainless steel box cleaning method： cleaning of high-temperature tools. Steps： 1. Place the product on a stable table 2. Open the bottle lid and put the quartz sandcleaning beads into the tank, not exceeding the tank volume 3. Turn on the power, turn on the switch, the heating light turns red, the product starts to heat quartz sand 4. After heating for 10-12 minutes, turn off the lights and insert the tools needed to be cleaned (such as scissors, razors, etc.) vertically into the quartz sandcleaning beads. 5. Heat the tool for 20-30 seconds, then put on insulated gloves and take out the tool. 6. When the temperature in the host machine reaches 200 celsius , the heating light will be automatically turned off and the product will stop heating. When the temperature is low, the product will heating automatically and the heating light will turn red again. Package List： 1 x Host 1 x Bag of Quartz Sand 1 x Manual Note： 1. Do not plug on before identifying the voltages of product and electrical source are congruent.2. Ensures that the power supply is with good grounding.3. Place the product on a stable table.4. Do not let children touches the product when working.5. Never use the product when there is no quartz sand in the tank6.6. No touching the fuselage with bare hands, avoiding any scalds.7. Keep quartz sands filling no more than 80percent volume of tank, in order to prevent overflow when inserting tools into quartz sands.8. After disinfecting, it is necessary to turn off the power switch and wear gloves before take the tools out.9. Please turn off the power switch when finish using. Remember to plug out if don't use of the product in a short time.10. Cleaning should be done after the product is plugged out and cool down 11, Never cleaning the product by water or other liquids directly.