Makita Impact Driver TD161 Blue Torque 175Nm 2 6Ah Batteries and Charger Included TD161DRGX (14.4V)

---------------------------------------------------------------------- 【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction.

【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary.

【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product.

【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. ---------------------------------------------------------------------- Pursuing workability! Towards the pinnacle of ease of use. ``Zero vibration'' reduces bit vibration: Newly adopted double ball bearings in the bearing part prevent the bit from shaking and are resistant to hard tightening! Assists with more work, "Easy 4 modes" [Wood mode, Bolt mode, Tesku (thick board) mode, Tesku (thin board) mode] + 4-stage impact mode switching. A total of 8 modes support everything from tightening that prioritizes power and speed to delicate tightening of small screws, etc. Equipped with a mode memory function that allows you to register one frequently used mode. You can switch the batting mode while holding the grip with the "batting mode switching hand button". Improved visibility with 2 left and right LED lights The newly adopted plastic case has a side handle shape that makes it easy to take out from the luggage compartment, a "large capacity" storage compartment for small items, and a simple locking mechanism to prevent accidental release when lifting. With the "New Optimal Charging Control" charger exclusively for Makita Li-ion batteries, full charging is the "fastest in the industry*1" in about 40 minutes*2, and practical charging in about 27 minutes*2, *3. Continuous rapid charging possible. (*1: As of January 2018, according to Makita research. *2: Battery with 18/14.4V6.0Ah (snow) mark. *3: Approximately 80% fully charged) DC 14.4V, sliding type Li-ion battery specification, 2 6.0Ah batteries, "new optimal charging control" charger included Chuck method: Bit sleeve type. Maximum tightening torque: 175N・m, number of rotations: 0 to 3,400 [rotations/min], number of blows: 0 to 3,600 [times/min], tightening capacity: 125 mm (coarse thread), amount of work per charge (estimate): approximately 430 [wood screws φ5.4 x 90 mm] (when using BL1460B) Mass: 1.4kg (when BL1460B is installed)