Industrial SFP Ethernet Switch []IGS-620TF 4-port 10/100/1000T + 2-port 100/1000X

We offer a wide variety of products, and the following precautions apply to some of them. Please note that they are listed for all products. 【Voltage Compatibility】Designed for Japanese voltage (90-110V). Using with a different voltage may cause malfunction. 【Plug Type】Japanese plugs (A or B type). Use a conversion adapter if needed. 【Transformers & Adapters】Transformers adjust voltage; adapters only change plug shape. Using an adapter without a transformer may damage the product. 【Liability】We are not responsible for damages caused by improper use, such as using the product without a transformer. 【Physical Ports】4 ports 10/100/1000Base-T RJ-45 (with automatic MDI/MDI-X function). 2-port SFP slot interface, SFP supports 1000Base-X 100Base-FX transceiver with DIP switch settings [Fiber Port Redundancy] Dual ports with the same connector type with automatic link status detection and redundancy. Only the primary port is active at a time; the backup port is blocked. If the primary port link fails, traffic is automatically swapped to the backup port. When the status of the primary port returns to link up, traffic is swapped from the backup port to the primary port. [Layer 2 Features] Auto-negotiation and supports 10/100Mbps half/full duplex and 1000Mbps full duplex modes. High-performance store-and-forward architecture, runt/CRC filtering eliminates erroneous packets to optimize network bandwidth. Prevents packet loss due to back pressure (Half-Duplex) and IEEE 802.3x PAUSE frame flow control (FullDuplex). 9K jumbo frame size support. Backplane (switching fabric): 12Gbps. Integrated address lookup engine, supports 1K absolute MAC addresses. Automatic address learning and address aging. CSMA/CD protocol 【Industrial Case/Installation】Thin IP30 metal case protection. DIN rail/wall mount design. Redundant power supply design – 12-48V DC, redundant power supply with reverse polarity protection – AC 24V power adapter available. Compatible with EFT protection for power line DC6000V. Supports 6000 VDC Ethernet ESD protection. Operating temperature -40~75℃ PLANET IGS-620TF is an industrial 6-port full Gigabit Ethernet switch that provides non-blocking wire speed performance and great flexibility for Gigabit Ethernet expansion in harsh industrial environments. It offers 4-port 10/100/1000Base-T RJ-45 copper and two additional 100/1000Base-X SFP fiber optic interfaces delivered in an IP30 ruggedized case with redundant power system.