Steloproad Enhanced Industrial Gigabit Input 30W Output Up To DIN Rail and Wall Mount PoE+ Injector, 12~48V PoE+ Adapter, IEEE802.3af/at 328ft,

We offer a wide variety of products, and the following precautions apply to some of them. Please note that they are listed for all products. 【Voltage Compatibility】Designed for Japanese voltage (90-110V). Using with a different voltage may cause malfunction. 【Plug Type】Japanese plugs (A or B type). Use a conversion adapter if needed. 【Transformers & Adapters】Transformers adjust voltage; adapters only change plug shape. Using an adapter without a transformer may damage the product. 【Liability】We are not responsible for damages caused by improper use, such as using the product without a transformer. [12~48VDC power input]: Industrial grade PoE injector supports wide voltage input, making it more suitable. As you know, most low voltage DC power systems only have 12V or 24V power supplies instead of 48V. This PoE injector can use 12V or 24V input to boost to 48V PoE output, so you don't need to consider the voltage of your power supply. device, it will be more convenient [Safe to use]: The poe adapter uses IEEE802.3 af/at PoE standard, is suitable for both 802.3af/at equipment, and has PD detection function, so it will not burn when you connect non-PoE devices. error [6KV Lightning Protection]: Our POE injector adopts surge protection design, can be used in harsh environments, and can withstand lightning strikes up to 6KV. Operating temperature is -40℃~80℃ (-40℉~176℉) [Wide range of installation methods]: The poe injector supports 10/100/1000 Base-T Gigabit networks, and also has Din-Rail and Wall-Mount installation methods. It has wide bandwidth and can support 4K/8K camera transmission. Widely used in wireless AP/CCTV security transmission/IP phone etc. [Worry-free Guarantee]: You will get 1x po injector and 1x user manual. Buy now and enjoy 30-day money-back, 18-mono exchange guarantee, and lifetime technical support [Worry-free Guarantee]: You get 1x po injector and 1x user manual. Buy now and enjoy 30-day money back, 18-mono exchange guarantee and lifetime technical support Overview: The LNK-INJ301 product is an enhanced Gigabit high-power PoE injector that can connect IEEE 802.3 af/at PoE devices such as cameras and access points to non-PoELAN switches within a distance of 100m Features: 12~48VDC power input 1 RJ45 Ethernet data input port + 1 RJ45PowerOver Ethernet output port (data + power) Supports IEEE802.3at Power over Ethernet (PoE+) power supply equipment Supports 10/100/1000Base-TX Supports DIN rail and wall mounting Extensive LED indicators for PoE diagnostics Environmentally hardened -40°C to 80°C (-40°F to 176°F) operating temperature Power pin assignment: 4/5 (+), 7/8 (-) How to configure: a) Connect the injector's Ethernet port to the LAN switch with a network cable. b) Connect the PoE output port to your PoE device. c) When the device is powered on, all PWR indicators will be on. If the indicator is not lit , check the power connection. d) When all cables are connected correctly, the indicator will light up according to the port status LED.  Package Contents: 1*LNK-INJ301 30WPoE Injector 1*Quick Start Guide 1*L-shaped Wall Mount Bracket