Transfer Switch Dual Power Fast Switching Automatic DIN Rail Mount 100A for Home

Feature: 1. Simpler Works: Supports both manual and auto operation as well as quick switching, which better guarantee reliable transmission. 2. Good Security: When the power supply is abnormal, the backup power supply works immediately to ensure the continuity and safety. 3. Practical Use: Composed of TSE and controller, used in testing and various places where continuous power failure is not allowed. 4. Safer for You: Comes with good isolation and anti interference performance, also enables self switching and self return for use. 5. Easy to Install: Specially designed for PZ30 distribution box, the DIN rail mount of this compact transfer switch is very easy. Specification: Item Type: Transfer Switch Product Model: NLQ41252P Switch Type: Secondary Power Distribution Rated Current: 100A Rated Voltage: 230V AC Insulation Voltage: 690V AC Rated Frequency: 50Hz60Hz Electrical Grade: PC grade isolation type. Electrical Service Life: 2000 times. Mechanical Service Life: 5000 times. Rated Short Circuit Current: 50kA SCPD (fuse): RT160063A Rated Impulse Withstand Voltage: 8kV Control Circuit Rated Control Voltage Us: AC220 V, 50Hz Correct Working Conditions: 85percent Us110percent Us Auxiliary Circuit: 2pcs independent relay, each relay includes 2 sets of transformer contacts. Contact Capacity: AC220V 50Hz Touch Time: <50ms Operation Transition Time: <50ms Return Time: <50ms Off Time: <50ms. Package List: 1 x Transfer Switch Note: 1. The maximum ambient temperature should not exceed 40 celsius , the minimum should not be lower than ‑5 celsius , and the average temperature within 24 hours should not be higher than 35 celsius . 2. The altitude of the installation site should not be higher than 2000m. 3. When the maximum temperature reaches 40 celsius , the relative humidity of the installation site should not exceed 50percent . When the temperature is the lowest temperature of ‑5 celsius , the relative humidity is higher, for example, if the temperature is 25 celsius , the relative humidity is 90percent . Special measures should be taken to deal with occasional condensation on product surfaces due to temperature changes. 4. During conversion, the internal switch will lose the coil in the control circuit. The coil can work normally at 85percent ‑110percent of the rated working voltage. If the voltage in the coil is too low, it may cause the coil to heat up or burn out. Simpler Works: Supports both manual and auto operation as well as quick switching, which better guarantee reliable transmission. Good Security: When the power supply is abnormal, the backup power supply works immediately to ensure the continuity and safety. Practical Use: Composed of TSE and controller, used in testing and various places where continuous power failure is not allowed. Safer for You: Comes with good isolation and anti interference performance, also enables self switching and self return for use. Easy to Install: Specially designed for PZ30 distribution box, the DIN rail mount of this compact transfer switch is very easy.