Window Film Privacy, Stained Glass Film, Frosted Opaque Glass Clings, Sun Blocking Vinyl Window Stickers for Door Home Office

Hign-concerned Chemical : None

Function : Decorative,Explosion-Proof,Heat Insulation,UV Protection,DIY,security theft Surface Treatment : Embossed,Frosted / Etched,Opaque,Stained,MIRROR,3D Type : Glass Films Feature : Self-Adhesive Material : PET

Origin : China size : wide 30cm 45cm 60cm 75cm 90cm by long 100cm or 200cm name : window privacy film vinyl for glass windows window film : window sticker window film anti look stained glass : privacy film window sticker for glass window window tint : adhesive for glass windows adhesive window film window vinyl : stained glass window film term of use : Five to eight years. function : furniture protection function 1 : heat control privacy sun protection

Small Tips for YOU,please read before buying. *Please Note that This Window Film Only Applies on Smooth Glass Surfaces.Do not Apply to Outside window or Windows with Crack.

*Don't forget to remove transparent backing side before putting on glass or it will not cling(Use a tape on a corner of the back side (the smooth side) to quickly remove the backing protective film).

*Please use a hair dryer to soften the film under cold weather (Heat Resistant up to 176℉)

Key FeaturesPrivacy Levels > 4 Star: create privacy and favorable space, easy to cut into any sizes to meet your special demands. Blocks Strong Sunlight and 96% Harmful Uv Rays: let soft lights in, heat insulation in the summer and heat preservation in the winter. Thenew strong glue designwill help the mirror window film cling on the window surface firmly and make it available for long time use. Environmental and Economical PVC material: ideal for flat, smooth and clean glass surfaces in the bathroom, balcony, living room, bedroom, bathroom, office,hotel, etc. Installation Instructions Step 1. Keep Window or Glass Clean Step 2. Measure the window and determine size Step 3. If you need to cut,draw lines the window film with markers. Make sure the edge of the protective film and the glass surface have a 1cm gap. Step 4. Wet the Window or Glass with water( the more flowing water, the better) Step 5. Remove the Static Film from backing protect sheet ( Please MAKE SURE you have removed it before you apply the matte window film to glass), if it is difficult to tear off the protective film, you can try to tape the two sides with duct tape and then peel off. Step 6. Squeegee away air bubbles and redundant water with a scraper or hard card (Don't move it again for 24 hours) Step 7. Much easier than Wall Decals, 2 people work together more efficiently. Step 8. Enjoy your works!