8PCS Oil Valley Block Off Plugs M8 Stainless Steel Sealing Oil Passages AFM DOD Plugs for Gen IV LS

Feature: 1. Compatibility: 8 AFMDOD plugs is used for sealing 20052018 Gen IV V oil passages. Fit for 20052018 Gen IV and 2014Current Gen V. Plugs are for use on stock DOD AFM valley covers only. Will not fit non DOD valley covers. 2. Easy to Install and Remove: These plugs can be used to seal the AFM oil passages under the VLOM plate. To install, simply tap the plug gently into the oil passage hole. Install until flush with the bottom edge of the plug. If needs to remove, the top is threaded for easy removal (4mm x .7 thread size). 3. Lifter Replacement: These are typically used to replace DOD AFM lifters with conventional for LS LS7 style lifters. Please note that these plugs are not to be used with non DOD valley covers or aftermarket valley covers. For use with stock DOD AFM valley covers. 4. Avoid Oil Leaking: Performance enthusiasts with for LS LT engines may to delete the Active Fuel Management (AFM) system, also known as Displacement on Demand (DOD). One of the key steps in this operation is to plug the oil passages in the block that supply oil to the system, otherwise a serious internal oil leak may occur, resulting in low oil pressure problems. 5. Installation Steps: First insert a stainless steel rivet plug into riveter and gently press the handle to hold the plug in place. Then position the tool over the intended oil passages and insert the rivet into cylinder. Finally, squeeze the handle until the rivet separates from the tool and is secured in the cylinder. Repeat this operation for the remaining oil feed holes as needed. Specification: Item Type: Oil Valley Block Off Plugs Material: Stainless Steel Description: Seal off DOD AFM oil passages, blocking to avoid oil pressure leakage. Fitment: Fit for 20052018 Gen IV and 2014Current Gen V. Package List: 8 x Oil Valley Block Off PlugsCompatibility: 8 AFMDOD plugs is used for sealing 20052018 Gen IV V oil passages. Fit for 20052018 Gen IV and 2014Current Gen V. Plugs are for use on stock DOD AFM valley covers only. Will not fit non DOD valley covers. Easy to Install and Remove: These plugs can be used to seal the AFM oil passages under the VLOM plate. To install, simply tap the plug gently into the oil passage hole. Install until flush with the bottom edge of the plug. If needs to remove, the top is Lifter Replacement: These are typically used to replace DOD AFM lifters with conventional for LS LS7 style lifters. Please note that these plugs are not to be used with non DOD valley covers or aftermarket valley covers. For use with stock DOD AFM valley Avoid Oil Leaking: Performance enthusiasts with for LS LT engines may to delete the Active Fuel Management (AFM) system, also known as Displacement on Demand (DOD). One of the key steps in this operation is to plug the oil passages in the block that Installation Steps: First insert a stainless steel rivet plug into riveter and gently press the handle to hold the plug in place. Then position the tool over the intended oil passages and insert the rivet into cylinder. Finally, squeeze the handle until