Geekria for Creators Microphone Shock Mount Compatible with Rode Microphone Suspension Adapter Clamp Mic Holder Clip NT-USB, NT1-A, NT2-A, NT1000,

A durable elastic band suspends the microphone in the center of the shock mount, isolating it from noise, shock, and vibration. Designed to prevent vibrations and noise from reaching the suspension shock mount through the mic stand or boom pole. A rubber mat is installed between the metal bolt and the microphone to prevent scratches and tighten the microphone. Metal shock mount is designed to be compatible with RODE NT-USB, NT1, NT1-A, NTK, NT2, NT2-A, NT1000, NT2000, NTK Valve 1, Procaster, Broadcaster, K2 microphone shock mounts. Package Includes: 1 x Black Metal Spider Shock Mount, 1 x 3/8" to 5/8" Metal Screw Adapter, 5 x Bottom Metal Screws in Different Sizes. Geekria for Creators shock mounts are designed to provide adequate protection from movement-induced noise. Suspension shock mount compatible microphone: - Compatible with Rode NT-USB microphone shock mount. - Compatible with Rode NT1, NT1-A microphone shock mount. - Compatible with Rode NT2, NT2-A microphone shock mount. - Compatible with Rode NT1000, NT2000, and NTK Valve 1 microphone shock mounts. - Compatible with Rode PROCASTER, BROADCASTER, and K2 microphone shock mounts. The anti-vibration spider shock mount has 5 different sizes of bottom screws, making it compatible with multiple microphones. Suitable for microphones with thread and thread diameter greater than 20mm to tighten the microphone to the shock mount. Note: - Microphone shock mount only, device not included.