Makita 40mm Rechargeable Hammer Drill 40Vmax4Ah 2 Case Included HR005GRMX Blue Batteries, Charger,

---------------------------------------------------------------------- 【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction. 【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary. 【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product. 【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. ---------------------------------------------------------------------- 40Vmax, 40mm rechargeable hammer drill. High power equivalent to AC machine (*compared to our company). Equipped with low vibration AVT + swing reduction mechanism AFT. Overwhelmingly low vibration, AVT & soft no-load. Vibration 3-axis composite value Hammer drill 5.0m/s2 (Hammer 4.0m/s2) *Measured based on EN60745-2-6 standard. *Soft no-load: When there is no load, the rotation speed is low and increases to the maximum rotation speed when it hits a member. Active dynamic vibration reducer. The "weight" is pushed out in the opposite direction to the "piston", canceling out the vibrations back and forth. Anti-vibration spring. The spring absorbs the vibration caused by the "reaction force at the tip of the bit." Anti-vibration double structure. The handle and the vibrating part (red part in the image) are separated, and vibrations are absorbed by the "anti-vibration spring." Protection from dust and rain, dustproof and waterproof protection class IP56. Compatible with this machine as well as batteries. *Although it is designed to be less susceptible to dust and water, it does not guarantee that it will not malfunction. If a battery is installed, the protection level of the main unit will apply. Reduced swinging. The acceleration sensor detects swinging during bit lock and "automatically stops the motor." *Please hold the unit securely while working. If the unit is swung around and does not reach the specified acceleration, this function will not work. Supports wireless linking (Bluetooth). DC 36V (40Vmax), slide-type Li-ion battery specification. Battery and charger included 1 charge work amount (estimate) Concrete drilling: Approximately 16 holes 18mm deep 140mm. Total length (mm) length 500mm x width 115mm x height 286mm. Drilling capacity (mm) concrete 40mm/core bit 105mm. Rotation speed (min-1) [revolutions/min] 250 to 500. Number of blows (min-1) [times/min] 1,450 to 2,900. Mass: 7.3kg *Supplementary information on mass (when BL4040 is installed)