XH-W3001 Digital Control Temperature Microcomputer Thermostat Switch Thermometer New Thermoregulator 12V/24V/220V 10A

Hign-concerned Chemical : None Model Number : XH-W3001 Type : Module

Origin : China Condition : New Features 1 : 12V/ 24V/ 110V /220V Features 2 : W3001 Features 3 : Digital LED Features 4 : Digital LED Temperature Controller Features 5 : Temperature Controller Features 6 : LED Temperature Controller Features 7 : 10A Features 8 : 10A Thermostat Control Features 9 : Control Switch Probe Features 10 : XH-W3001

Product Parameters: Name:Microcomputer temperature controller Product Model:XH-W3001 Temperature range:-50~110℃℃. Temperature control range:-50~110℃℃ Temperature measurement accuracy:± 0.2 ℃ ℃ Temperature control accuracy:±0.1℃ Measurement input:NTC10KL = 1 meter waterproof probe Input power:12/220V Output power:120/1500W Output type:direct output Output capacity:Maximum 10A Installation Hole Distance:73mm(Hole Diameter 4mm) Appearance Size:60*45*31mm

Product use: Setting the starting temperature: Press the up key once, the start temperature is displayed, long press the up key for about 3 seconds, the start temperature number flashes, you can set the desired temperature value by up and down keys. Setting the stop temperature: press the lower key once, the stop temperature is displayed, long press the lower key for about 3 seconds, the stop temperature number flashes, you can set the desired temperature value by up and down keys. How to restore the factory setting:Under power on condition, press and hold the up and down key at the same time, the digital tube will display 888 and then automatically jump to the detection temperature, that is to say, the factory setting is restored.

How to set the heating mode: Setting essentials: Start temperature < stop temperature (the program automatically determines the working mode as heating mode). Setting mode: 1. Press and hold the up button, the start temperature will blink, set the start temperature value by up and down buttons. Press and hold the down key, the start temperature flashes, and set the start temperature value by up and down key. 2. Press and hold the down key, the stop temperature flashes, and the stop temperature is set by the up and down keys.

Use Case:Control water heater, heating up to 65℃. Control the water heater, heating to 65 ℃ to stop, the temperature falls back to 50 ℃ to start heating again, how to set? Step 1:Make sure the working mode is heating mode, start temperature < stop temperature. Step 2:Long press the up button, the start temperature flashes through the up and down keys to set the start temperature to 50℃. Step 3:Long press the down button, the stop temperature flashes, set the stop temperature to 65℃ by up and down keys, setting is done!

Cooling mode setting method: Setting principles:Start temperature > Stop temperature (the program automatically determines the working mode as cooling mode) Start temperature > Stop temperature (the program automatically determines that the working mode is the cooling mode). Setting method. 1. Long press the up button, the start temperature flashes, set the start temperature value by up and down key. 2. Long press the down key, the stop temperature flashes, set the stop temperature value by up and down key.

Example of use:Control farm, ventilation up to 26℃. Control the farm, ventilation to 26 ℃ to stop, the temperature rises to 28 ℃ to start refrigeration again, how to set? Step 1:Make sure the working mode is cooling mode, start temperature > stop temperature. Step 2:Long press the up button, the start temperature flashing through the up and down keys to set the start temperature to 28 ℃. Step 3:Long press the down button, the stop temperature flashes and set the stop temperature to 26℃ by up and down button, the setting is done!

Tip. When setting the heating mode, if you accidentally set the set temperature value upside down, the output indicator will not light up and the load will not work, after setting, if the above situation occurs, you can check whether the set temperature value is upside down or not.

In the industrial field, our industrial products have become the trusted choice for all industries with their three core advantages of stability, precision and durability

In terms of stability, from R&D to production, every link strictly follows high standards. Through precise circuit design and high-quality electronic components, we ensure that the equipment can operate continuously and stably under complex operating conditions, avoid production interruptions caused by fluctuations, and ensure smooth and unimpeded production processes.

In terms of accuracy, advanced sensing technologies and algorithms are used to achieve accurate measurement and control of various parameters. High precision controls your production, whether it is precision parts processing or the execution of complex processes, it can accurately meet your production needs and help product quality to a higher level.

Durability has been tested even more rigorously. High-quality materials are selected and exquisite manufacturing technology gives the product strong resistance to wear and corrosion. It can withstand high-intensity work for a long time, reduce the frequency of equipment repair and replacement, reduce your operating costs, and provide solid guarantees for long-term production.

Choosing our products is to choose efficient and reliable production partners to inject a steady stream of momentum into your industrial production.