Feature:
1. High voltage module can be used as a highvoltage source for students" popular science experiments, electronic instruments, negative ion generators and science small productions.
2. Power boost module is made by using the principle of boost discharge with high voltage pulse output, and the discharge strength is violent.
3. Meanwhile, high efficiency and small size module installation is simple, not require particularly complicated operations.
4. And such voltage boost module can be used in high voltage production, electronic, product development, high voltage electronic anti theft, etc.
5. High voltage generator"s input voltage is 3.7V7.4V, output voltage is about DC400800KV.
Specification:
Item Type: High voltage generator
Model: HXCDY
Volume:
Length: Approx. 135mm 5.3in
Diameter: Approx. 24mm 0.9in
Voltage Input: DC3.77.4V
Output: DC400800KV
Current Input: 4A
Output: 0.5A
Line Length:
Input End: Approx. 12cm 4.7in
Output End: Approx. 9cm 3.5in
Structure: Split shell
Two Poles Discharge Distance: Approx. 1 ~ 3cm 0.4 ~ 1.2in(easy damage while outside the range)
Uses: Commonly used in highvoltage production, electronic, product development, highvoltage electronic antitheft, etc.
How to Use: The two poles of the highvoltage output end (monochrome thick wire) are fixed within the prescribed discharge distance, and the lowvoltage input end (twocolor thin wire) red wire positive electrode and green wire negative electrode are connected to the battery to produce high voltage arc work.
Input Requirements: This product does not require an auxiliary circuit, and can be used directly by connecting the battery. The input terminal is connected to a single 3.7V li battery or NiCdNiMH battery pack..
Package List:
1 x High Voltage Module
Note:
1. The high voltage module should avoid being energized when the high voltage is unloaded. Before energizing, the appropriate distance of the high voltage line end must be adjusted. The arcing distance of the high voltage line is proportional to the battery voltage and capacity used.2. When testing the arc distance, the experiment should be from short to long. It is strictly forbidden to exceed the maximum arc distance when energized. Because the high voltage energy cannot be released, the module is easily damaged.3. Power of the module is large, and the internal is not suitable for heat dissipation, so it is not allowed to work for a long time.4. Method to judge whether the battery capacity can drive the maximum output power is to measure the battery voltage when the arc is drawn. If it is around 6V, it can output the maximum power.5. The two small capacity lithium batteries are connected in series at 7.2V. The measured voltage has dropped to about 4V in the state of arc drawing. The smaller the capacity, the lower the voltage. Therefore, it is recommended to use li batteries above 2000MA, and it is best to match batteries above 4000MA if possible.6. Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.High voltage module can be used as a highvoltage source for students" popular science experiments, electronic instruments, negative ion generators and science small productions.
Power boost module is made by using the principle of boost discharge with high voltage pulse output, and the discharge strength is violent.
Meanwhile, high efficiency and small size module installation is simple, not require particularly complicated operations.
And such voltage boost module can be used in high voltage production, electronic, product development, high voltage electronic anti theft, etc.
High voltage generator"s input voltage is 3.7V7.4V, output voltage is about DC400800KV.
No-delivery refund
