Nylon Flue Soot Rod Kit Sweeping Brush Sweep Kit Chimney

Label:Yes Connecting rod length: 45mm Type: Chimny Brush Specifications: Material: Nylon Color: Black+White Diameter of the brush head: 100mm Single Connecting Rod Length: 410mm / 16.1in

Features: -The brush wire is made of nylon, which is resistant to high temperature and aging, not easy to corrode. -The brush rod adopts a soft connecting rod, which is flexible and convenient to clean and has a long service life. -High flexibility, perfect to get through the flue bends. -Single pin thread push fitting, no looseness in any direction of rotation. -This efficient dryer vent brush can be used with or without a power drill and will help you achieve professional results. -It is a necessary helper for cleaning the chimney and dryer vents, extending the life of the dryer and chimney.

Package include: 6/9/11/12*410mm long rod+1* 100mm brush head+1* hexagonal rod

How to use 1. Connect a sufficient number of poles as needed; 2. Install the brush head on the pole, (if you use a power drill, go ahead and install the hex pole); 3. When you start off go slow and clean out 2-3 feet at a time and pull the brush back towards you to bring all the dust junk back to or down to you. Going vertical to push the junk out won't work. However horizontal may work for you. 4. Get someone to do the drill work for you as you guide the rod and brush in and out of the pipe. As you go in pull it back and forth and then go in further. Once you have done about 3 feet pull it all back out to bring the junk back to you. 5. WEAR A MASK !! There will be dust everywhere. It will smell like fabric softener everywhere. 6.Caution:Rotate brush/rod(s) assembly only in a clockwise direction.Reversing the direction could cause the brush head or rod(s) to detach inside the duct. WARNING: Never force the brush/rod assembly through the duct! If it should become jammed, pull assembly away from constricted area a few inches (still rotating in a clockwise direction) then slowly push forward.