SMALLRIG CH3 Video Tripod Fluid Head with Pan and Tilt for Arca Swiss 3kg Max 4936 Cameras, 360° Rotation, 90°/-70° Tilt, Load,

Compact and Portable: The SmallRig CH3 Video Head 4936 is a compact fluid video head weighing just 271g, but with a maximum load capacity of 3kg. Its height of 75mm and base diameter of 44mm make it extremely portable. The fluid head dimensions are 240mm x 55mm x 85mm. Pan and Tilt Adjustment: The fluid head features fixed damping for smooth operation. This tripod head allows for +90°/-70° tilt and 360° rotation using the handle, allowing for multi-angle video capture. [Quick Release Plate] This Fluid Head 4936 comes with a quick release plate for Arca-Swiss, which allows you to switch mounting directions, supports the use of cages and L-brackets, and allows you to quickly switch between handheld and tripod modes. 【Detachable Telescopic Handle】This tripod head 4936 comes with a detachable handle that can be removed and attached to either the left or right side, and is compatible with both front and rear mounting, making it easy to store and carry. [Wide Compatibility] The quick-release plate on the top of the fluid head features a 1/4"-20 screw that can be directional mounted to a camera or cage. The bottom features a 3/8" screw hole, making it compatible with most tripods and monopods. This tripod can also support accessories such as magic arms via the deflection-resistant 1/4"-20 screw hole. [Notes] 1. Before shooting, make sure the head and tripod are properly locked. 2. Avoid using the camera in sandy or dusty environments to prevent damage. 3. Maximum head load: 3kg. 4. The video head weight capacity is not an absolute limit and will vary depending on the type of equipment, lens used, attached accessories, and changes in the center of gravity. SmallRig Miniature Damping Pan/Tilt Video Head CH3 4936 Key Features 1. Compact and heavy-duty, weighing only 271g and withstanding up to 3kg 2. Quick release plate mounting direction can be switched 3. Built-in expansion hole for expanding external devices Product Introduction The SmallRig Micro Damping Head CH3-4936 is a compact damping head designed for videography. The head features a detachable handle and can be rotated for adjustment, making storage more compact and camera operation more comfortable. Its -70° and 360° horizontal adjustments allow for stable shooting at various angles. The included wrench allows for easy adjustment of the quick-release plate base, allowing the gimbal's quick-release plate to be used horizontally or vertically. A 1/4"-20 expansion hole allows for expansion of external equipment such as a magic wand. The pan/tilt weighs 271g and has a maximum payload capacity of 3kg. Its compact size and 3kg payload capacity make it easy to carry even with heavy loads. Points to note: 1. Before shooting, make sure the gimbal and tripod are locked in normal status. 2. Avoid using the product in a dusty environment as it may be damaged. 3. The recommended weight capacity of the gimbal is 3kg. 4. The gimbal's load-bearing capacity is not the ultimate performance and varies depending on the type of equipment, lens used, kit used, center of gravity, etc. Adaptability Arca quick release plate What's in the box Panhead x 1 Hex wrench x 2 Warranty card x 1 Product parameters Product size: 240.0 x 55.0 x 85.0 mm Packing size: 250.0 x 72.0 x 100.0 mm Product weight: 271g±2g Packing weight: 400g±2g Working height: 7cm Pitch/Tilt Angle: +90°/-70° PTZ load capacity: 3kg Dynamic balance rebound force: 1kg Pitch damping gear: fixed Horizontal damping gear: fixed Pan-tilt base diameter: 44mm Main materials: aluminum alloy, POM, stainless steel, silicone Related Items 4937, 3912, 3983