Package included:
2 water bags
1 x Cultivation Center
1 x Cotton Pad
1 x Sprinkle Bottle
1 x 12V Cable
1 x 220V Cable
Specifications: Model:
Material: PP plastic
Manchine Voltage: DC 12V±10%
Adapter Voltage: AC220V±10%50HZ
Output Voltage: DC 12V±10%2A
Temperature measurement accuracy: ±0.1 ℃
Environmental humidity: ≤85%RH
Environmental temperature: -10 ℃ -38 ℃
Property:
- High and low temperature resistant material
- Transparent box with built-in egg transmitter for easy observation
- Ventilation holes on both sides increase the oxygen content in the tank, high hatch rate
- Multiple types of hatching: eggs, duck eggs, goose eggs, bird eggs, etc.
Operation Steps:
1. Turn on the tester
2. Put one plastic bag in another plastic bag, then pour water (should put about 30 degrees).
Plastic bags and place plastic bags at the bottom of the box.
3. Place the temperature probe on the surface of the plastic bag with tape (must be placed on the top surface).
4. Start machine testing and wait for constant temperature before calibration thermometer.
5. The water bottle contains water and placed in the machine to maintain the water temperature of the kettle.
Conform to the temperature of hatching eggs
6. Put the hatch egg after disinfection and place it directly on the plastic bag.
7. Put a small blanket on the hatch egg and close the hatch egg firmly.
8. Three days of water spray before peeling, spray 2~3 times a day, spray twice each time.
Note: Do not cover the packed stuff such as plastic sheet, etc., original packaging foam cover cannot be used when hatching.
Warning:
X Please check whether the water bag leaks or may cause short circuit.
X After placing the egg on plastic, put a small blanket that is not too loose or too tight, you need to
Make sure there is enough oxygen in the incubator.
X Default temperature is 37.8 ° C and the number of eggs can hatch at the same temperature regardless of
Of eggs (cultivation center can contain 32 eggs)
Xhatching time is 19-23 days, different egg types have different hatching time.
X During the hatching period, in addition to changing eggs, you need to spray three days of water first.
The bullet casing sprays 2-3 times a day twice each time.
Operational instruction:
Temperature setting:
In normal display status, short press "SET" button, the number flashes on the screen is
Current machine setting temperature press "+" or "-" at this time.
Press the button to adjust according to the desired temperature, then press the "SET" button.
The machine will automatically record and leave the setting interface.
Egg baking
Press the "Egg Candling" button to release, then the control panel turns on the candle lamp.
Place hatch eggs in the candle hole to observe after observing.
Press the "Egg Candling" button to turn off the Candling Egg tube.
Temperature Calibration Setting:
Hair
No-delivery refund
