DC Voltage Contactor Mute for Smart Home Hotel Intelligent Control System 25A BCH8‑25Z 2NO

Feature: 1. Long electrical life, this contactor has been tested and verified and can withstand 100,000 full‑load switching times under AC‑a load category. 2. Eliminate the impact sound of the traditional contactor at the moment of closing, and eliminate the low‑frequency buzzing sound of the contactor during operation. 3. Suitable for most building electrical fields, especially the AC DC series achieves 0 noise and creates an extremely quiet environment for you. 4. The optimized electromagnetic system greatly reduces the holding power of the contactor, super energy saving. 5. The width of the contactor is much smaller than that of the traditional contactor, which saves the user s installation space and can be easily installed in the ordinary distribution box. 6. Auxiliary contacts can be extended on the right side of the product, which is more suitable for signal feedback requirements in intelligent control environments. Specification: Item Type: DC Voltage ContactorRated Voltage (Ue): 250VAC Rated Current: 25A Frequency: 50 60Hz Mechanical Life (O C): 1000000 times Electrical Life: 100,000 times Maximum Number of Switch Operations Per Day: 100 Insulation Voltage (U): 500VAC Pollution Degree: 2 Rated Impulse Withstand Voltage (Uimp): 2.5kV (4kV at 12 24 48VAC) Protection Class of Contactor Body: IP20 Installed In Distribution Box, Protection Level: IP40 (IEC 60529) Working Temperature: 5 celsius +60 celsius Storage Temperature: 40 celsius +70 celsius Humidity and heat resistance (IEC60068.1) Class 2 (when the temperature is 55 celsius , the relative humidity is 95percent ) ELSV (Extra Low Safety Voltage) conforms to the 12 24 48VAC version Product control meets the requirements of SELV (Safety Extra Low Voltage) Scope of Application: 1.BCH8 series of household contactors (hereinafter referred to as contactors) are mainly suitable for AC 50Hz (or 60Hz), rated working voltage to 400V and rated working current to 100A circuits, to control low inductance and micro inductive loads of household appliances and similar purposes; also available To control the load of the household motor, the control power should be reduced accordingly. 2.Products are used in homes, hotels, apartments and other places to achieve automation functions and are used in mass produced household appliances. 3.Meet The Standards: GB T 17885, IEC EN61095 4.Can be used for intelligent control system 5.DC muteSize: Approx. 18mm 0.7in36mm 1.4in 68mm 2.7in49mm 1.9in 5.5mm 0.2in 23.5mm 0.9in81mm 3.2in 4mm 0.2in 45mm 1.8in . Package List: 1 x DC Voltage Contactor Note: When the contactor is installed in the distribution box, spacers must be assembled on both sides to facilitate heat dissipation