Nitrogen Gas Spring Pressing Die Compressed Cylinder Industrial Mold Supplies 320 SeriesYX320 025

Feature: 1. The upper part of the nitrogen gas spring cylinder has a C shape notch that meets the ISO standard, and the bottom has screw hole for easy installation. 2. The initial spring pressure of YX320 series nitrogen gas spring is 3200N, with long stroke and stable operation. 3. With piston rod, the hardness is high after fine machining, and the surface roughness reaches about Ra0.02um. 4. The cylinder body of the gas spring adopts an integral cutting and forming process to ensure its safety and stability. 5. The cylinder body Diameter of the nitrogen gas spring is 24.9mm, the plunger Diameter is 15mm, and the adaptability is strong. Specification: Item Type: Nitrogen Gas Spring Material: Alloy Purpose: Die compression nitrogen cylinder Cylinder Diameter: Approx. 24.9mm 1in Plunger Diameter: Approx. 15mm 0.6in. Package List: 1 x Nitrogen Gas Spring1 x Storage Box Note: 1. Do not use the nitrogen gas spring plunger rod for fixing, and the threaded hole at the end of the piston rod cannot be used as a lifting hole for lifting2. Do not modify the following aspects of the nitrogen gas spring:(1)Drill holes on the cylinder block of the nitrogen gas spring, the sealing ring, etc.(2)The piston rod is shortened in order to reduce the stroke(3)Do not perform other processing on the nitrogen gas spring and its accessories3. Do not use nitrogen gas springs for purposes outside the scope of product catalog specifications4. Do not allow the ammonia gas spring to return freely after being compressed, as this will cause damage to the internal structure