Tamiya 1/10 Scale Electric RC Car Series No. 708 1/10 Scale RC Alpine A110 Jägermeister 1973 (M-06 Chassis) 58708

Product Introduction

Length: 395mm, Width: 168mm, Height: 121mm. Wheelbase: 210mm. Tread: 138mm (front and rear). Drivetrain: Rear-wheel drive, rear motor. Differential gear: 3-bevel. Steering tie rod: 3-piece. Suspension: 4-wheel independent double wishbone. Front and rear friction dampers. Gear ratio: 5.8:1 (when using the kit-standard 20T pinion). Motor: Type 540. Tire width/diameter: 25mm/59mm (front and rear). Speed ​​controller: ESC required (sold separately).

The photo shows the kit assembled and partially painted. *The body is painted orange and the windows are smoked. *The wheel arches are pre-cut and holes for the body catches are pre-drilled.

[Items to be purchased separately (not included)] Finespec 2.4G Electric RC Drive Set, 4 AA batteries for transmitter.

*This product requires a power source to operate, but does not include batteries, chargers, or a charger.

Transmitter, RC mechanism, etc. are not included. Additional parts must be purchased, assembled, and painted before operation. *This product does not use fuel. Fuel is not included. *Paint and adhesives are not included.

Safety Warning

Operate in a wide, safe area, such as an RC car circuit. Never operate on roads. Do not operate in crowded areas, parks, or near small children. Do not operate in narrow spaces or indoors. Do not operate near schools, hospitals, residential areas, or other areas where it may disturb others. Do not operate at night or early in the morning.

This is an assembly kit for an electric radio-controlled car featuring the vibrant orange Alpine A110. The unique and beautiful two-door coupe form is realistically reproduced in a polycarbonate body painted orange. Stickers for sponsor logos, numbers, and moldings are included for the finishing touch. The chassis is the rear-wheel-drive M-06, with a rear-mounted motor and a 210mm wheelbase. The chassis is a rear-motor, rear-wheel-drive M-06. The bathtub-type frame houses the battery pack mounted vertically. The servos, ESC, and receiver are positioned on either side of the battery for excellent weight balance, while heavy components are mounted almost at tire height for a low center of gravity. Furthermore, the wheels, inspired by the dish design found on many 1970s sports cars, feature 60D radials in the front and 60D super radials (hard) for excellent grip in the rear. This enhances rear stability and makes for easy maneuverability. Length: 395 mm. The photo shows the assembled and partially painted kit. *The body is painted orange and the windows are smoked. *The wheel arches have been cut and holes have been drilled for the body catches.