FANAHOKO Cable Routing Extendable Magnetic Pickup Tool with Interchangeable Maximum Minimum 34cm Hook, S-Hook, Tips, Length 182cm, Length

[Uses] The wiring hook with S-shaped hook can be used for both pulling and pushing. Ideal for cable routing in attics, etc. Durable telescopic design: The telescopic section is made of rust-resistant stainless steel for durability. Maximum length: 1.82m, retracted length: 34cm. Weight: 0.2kg [Can be picked up] Equipped with magnetic fittings, it can easily pick up nuts, bolts, small tools, etc. in narrow, hard-to-reach places. [Hard to slip out of your hand] There is double gum on the grip, which makes it hard to slip out of your hand during use. [Interchangeable Tips] The tips are interchangeable. They can also be used in combination with the separately sold ball chain (B085BNBQB6) and emergency light inspection hook (B097T216Y2). Material: Stainless steel, synthetic gum Maximum length: 1.82m Storage length: 34cm Weight: 0.2 kg Tensile load: approx. 6.75 kg Number of rods: 7 Tip fittings: S-hook, magnet Screw hole diameter: 4mm The tip fittings are replaceable, and the S-hook can be used for light indexing of electrical wires, either by pulling or pushing. The magnet makes it easy to pick up small items such as screws. When replacing with an S-hook, the magnet on the tip fitting can be stored in the butt section. The 7-position sliding rod extends from approximately 34 cm when stored to a maximum of approximately 182 cm. You can adjust the length to suit your needs, even in hard-to-reach places. Because it is thin and has an S-shaped hook, it can be inserted through gaps other than inspection hatches, making it suitable for situations where work cannot be done through inspection hatches, such as during renovations or additional construction work.