[Small and Versatile] This charger can charge 12V devices. It is compatible with a wide range of applications, including motorcycles, cars, light vehicles, vans, trucks, agricultural vehicles, and lawnmowers. The compact design saves space and is easy to store and carry.
[Digital Display Screen] The charging data changes automatically on the LED screen, displaying temperature, current, voltage, and power. You can always check the battery charging status. It is safe to use. It has winter and summer modes. The charger can detect the internal temperature and automatically switches to winter mode when the temperature is below 10°C, switching to the appropriate voltage to fully charge the battery. It switches to summer mode when the temperature is above 28°C to prevent overcharging.
[Maintenance Function]: After a battery is fully charged, it enters maintenance mode, which keeps the battery in a fully charged state by constantly sending a small current to compensate for capacity loss caused by discharge. This mode is said to be very good for lead.
[Multiple Protection] The charger has protection functions for overheating, short circuit, reverse connection, overcharging, etc. If it detects that the temperature is too high, it will automatically start the overheat protection program, and when the temperature returns to normal, it will return to the initial charging state.
[Easy to Use] Simply check the voltage of your motorcycle or car, connect the charging clips carefully, and plug them into an outlet, paying attention to the polarity. It will automatically shut off when fully charged, so you don't have to worry about overcharging. To compensate for natural discharge, it uses a "trickle charging" method, which keeps charging with a minute current. This type of charging method puts less strain on your device even when you continue charging.
Caution: Please read the instruction manual carefully before use. Do not charge lithium-ion batteries. This product is only suitable for 12V lead-acid batteries. Do not charge over-discharged, old, poorly vulcanized, or swollen batteries. This product is a charger; it does not have a built-in battery. It cannot be used as a jump starter.
If FUL is displayed shortly after charging, switch to repair mode and perform a repair charge. If the battery voltage is over-discharged to less than approximately 6V, this product will not be able to charge. Before charging, check that the battery electrolyte is not low.
Do not use this product with NiCd, NiMH, or Lithium-ion batteries. Misuse may cause the charger to overheat, catch fire, or emit smoke, or may leak, overheat, or catch fire.
How to Use: 1. Attach the output alligator clips to both ends of the charger, with the red cable connected to the positive terminal and the black cable connected to the negative terminal. 2. Plug the charger cable into a power outlet. 3. Select the charging mode and begin charging. 4. When the charger displays "FUL," charging is complete. Unplug the charger and wait 10 seconds before observing the capacity (the digital screen will display voltage and power). Once fully charged, remove the alligator clips.
Precautions: 1. Before charging, check for damage to the battery and for any abnormalities such as leakage around the battery. If any abnormalities are found, charge with caution. 2. Avoid high temperatures and humidity while charging. 3. When charging, do not cover the surface of the battery with anything and charge it upright. 4. If the sulfide content at both ends of the positive and negative poles is too high, you must first remove the sulfide content to ensure better charging. 5. When the output terminal of the charger is connected to the , operate it with one hand. That is, with one hand, hold the black clip to the negative pole of the and the red clip to the positive pole of the .