NISYO Air Conditioner Outdoor Unit Cover with Heat Sunshade Wide Energy Power Prevents Outdoor Unit High-Grade Shield, Panel, Aluminum, Type, Saving,

✅Size: Approximately 110cm x 42.5cm, Weight: 260g. Mounting straps: Two long straps (approx. 220cm each), two short straps (approx. 45cm each). Recommended size for air conditioner outdoor units: Up to 35cm deep x 80cm wide x 60cm high. If using with an air conditioner outdoor unit larger than the recommended size, the awning will be shorter, but it will still work. ✅Features: The aluminum reflective surface blocks approximately 40% of heat rays. Two air layers (bubble wrap) are used as the middle layer. The back is also made of aluminum reflective material, resulting in a total of four layers of heat insulation and heat transfer to the air conditioner's outdoor unit. The JIS standard cooling load test condition is 43°C. This means that Japanese air conditioner manufacturers guarantee performance up to an outdoor temperature of 43°C. Above 43°C, the heat generated by the electronic components inside the air conditioner may exceed the standard, causing many manufacturers to experience a drop in cooling capacity. This is believed to be one of the causes of poor air conditioner performance during extreme heat. With temperatures exceeding 40°C in direct sunlight expected to increase during this heatwave, we recommend covering the outdoor unit to protect it from direct sunlight before your air conditioner begins to lose performance or the outdoor unit malfunctions. Features a secure, wind-resistant fastening belt. Compared to magnetic, adhesive, and sleek belt-less designs, this design is more resistant to wind and rain. The belt holes have eyelets, making them resistant to damage caused by wind. Easy installation, no tools required: The belt system allows for easy installation without the need for tools. Compatible with various air conditioner outdoor units, simply trim the excess belt with scissors for a neat, snug fit without being sucked into the outdoor unit fan. ✅Caution: ● Always turn off the power to the air conditioner before installing. ● Please be careful not to pull the band too hard as it may be damaged. ● Depending on the shape of the outdoor unit, installation may not be possible. ● Do not install in a way that blocks the intake or exhaust parts of the outdoor unit as this is dangerous. ● We recommend removing the product in advance depending on weather conditions. ● If the product has deteriorated, remove it and replace it with a new one. ✅Material: Body: Polyester, Aluminum. Piping and Belt: Polypropylene This is a wide-type air conditioner outdoor unit cover with a visor.