Our store offers a curated selection of genuine Japanese products. You can shop with complete peace of mind knowing that all our items are authentic. Please note that the instructions and manual for this product may only be available in Japanese.
1. KEY FEATURES:
- Thin blade single-edged nippers that are specialized for gate cutting of plastic models and have both sharpness and durability.
- Main country of manufacture: Japan
- Specifications: Total length approximately 120mm, weight approximately 60g, single-edged structure
- Compatible materials: Only plastics (PS resin, PP resin, ABS resin, PE resin) can be cut.
- Cutting ability: Can only cut compatible materials of Φ3 mm or less.However, transparent/semi-transparent PS resin is hard, so it is limited to Φ2mm or less.
2. PRODUCT DESCRIPTION:
Product introduction A blade one nipper for the left hand that is easy to handle with the left hand, with the cutting blade and cutting board blade attached oppositely!Blade One Nipper L is a standard model of single-edged nippers.This nipper is suitable for people who want to use it with their left hand, such as left-handed people.Like regular Blade One Nippers, the blades are thicker than the Ultimate Nippers, so the cutting surface is slightly pressed against the cutting board side, but the thicker blades make them more durable.•Single-blade structure that can be used in the same way as the Ultimate Nippers •Adjusted blade angle to make the blade last longer than the Ultimate Nippers •While the Ultimate Nippers can cut transparent plastic up to Φ1mm, the Blade One Nippers can cut up to Φ2mm •The cutting feeling is slightly heavier than the Ultimate Nippers, but the cutting surface when slicing is almost the same •Left-handed use that is easy to use even for left-handed people•Material: Special tool steel (manufactured by Kobe Steel) •Total length: Approx. 120mm •Weight: Approx. 60g •Blade hardness: HRC58 or higher •Single-edged specification •Blade breakage prevention stopper •Over-opening prevention pin •Spring included •Soft grip •Original nipper cap included •Left-handed cutting ability •Compatible materials: Can only cut plastics (PS resin, PP resin, ABS resin, PE resin).•Cutting ability: Can only cut compatible materials of Φ3 mm or less.However, transparent/semi-transparent PS resin is hard, so it is limited to Φ2mm or less.Notes: - The blade is reversed from the normal blade one nipper.- These are delicate nippers that focus on sharpness, so if you use them incorrectly, the blades may chip or break. - Even a weak force will cut, so don't grip them with more force than necessary. - The blade gets thinner towards the tip and is more likely to break, so cut as close to the middle of the blade as possible. - Do not twist the blade while cutting or when removing the blade from the runner after cutting.Twisting will put stress on the blade and cause it to break. •Do not cut anything that does not fit within the length of the blade.Load is applied to one point in the middle of the blade, causing it to break or bend. - Do not use it to cut plastic that is thicker than its cutting capacity, or materials that are not compatible (metal, resin, paper, etc.) - Do not use it for cutting plastic boards, tags, parts, dowels, etc. - During and after use, remove any chips stuck to the blade with a toothbrush (blade brush), etc.If you cut with chips remaining on the blade, it will put more stress on the blade than necessary and cause damage.In particular, if you use the tool with chips stuck at the base of the blade, the moving parts are likely to become loose. - Do not touch the cutting edge of the cutting blade directly with your hands.The "cutting blade" is a sharp knife, so there is a risk of injury. -Sebum can cause rust.If you touch the metal parts directly, wipe off any fingerprints and apply anti-rust oil. - Moisture can also cause rust, so apply oil frequently during the rainy season. - If the lubrication performance of the moving parts decreases, the shaft will wear out, leading to a reduction in sharpness due to rattling. Make sure to regularly apply lubricant to the moving parts. - For safety, wear safety goggles when using the tool. - There is a risk of cutting objects flying off.Make sure that there are no people around and that there are no breakable items before starting work. •Keep out of the reach of small children. •When not in use, be sure to keep safety in mind by attaching the included nipper cap.Safety Warning Be sure to read the instruction manual before use.
3. PRODUCT DIMENSIONS & WEIGHT:
- Weight: 0.07 kg
- Dimensions: 19.2 x 7.3 x 1.4 cm
4. SPECIFICATIONS:
No-delivery refund
