3in 1 Digital Radio Antenna with Amplifier for DAB AM FM Car Radio Antenna AerialSMA Bend Head

Feature: 1. A roof mounted combined DAB + AM FM aerial antenna. This will replace the roof aerial to allow both DAB and FM to avoid the need to add additional DAB aerials. 2. Built‑in amplifier increases the signal for both DAB and FM allowing the reception even in areas in which would usually have poor radio reception. 3. This antenna uses high‑quality pure copper wire, the signal is stable, waterproof and corrosion‑resistant, no need to worry about water interference. 4. The antenna is simple to install, non‑destructive installation, no complicated tools, and the antenna fixed by the nut is very firm. 5. Entitled with practical adoptability, its high quality can keep its high performance for a long time, and it is sturdy, stable performance, suitable for most car. Specification: Item Type: Car Antenna Material: ABS, Pure Copper Wire Color: Black Antenna Parameters: Receive Frequency Range: AM(530K 1710KHZ) FM(87.5 108MHZ) Digital DAB Receiving Frequency Range: DAB (170 230MHZ) (1452 1492MHZ) Bandwidth: more than 10 (+ 0.5) VSWR: less than 1.5 (+ 0.5) Gain: 15dB (+ 3) Amplifier Gain: 15dB (+ 2) Characteristic Impedance: 75 Ohm Current: 45 60mA (+ 2) Model: Universal Installation: 1. Mount the top antenna on the back of the car roof. 2. Fix the antenna inside the car with a nut. 3. Pull the antenna output cable into the dashboard along the roof of the car. 4. Connect the radio and DAB connectors to the corresponding function connectors of the car radio respectively. 5. Connect the red power supply to the 12v power supply of the car. . Package List: 1 x Car Antenna Note: Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.