OBD2 Scanner Universal Car Diagnostic Tool Fault Code Reader with Reading and Clearing Error Codes Car Engine Check Scanner, Also Freeze Frame Data Display current sensor data including: Engine RPM, Calculated Load Value, Fuel System Status, Vehicle Speed, Short Term Fuel Trim, Long Term Fuel Trim, Intake Manifold Pressure, Timing Advance, Intake Air Temperature, Air Flow Rate, Absolute Throttle Position, Oxygen sensor voltages/associated short term fuel. Simple and super easy to use. This little device saves you the trips to your mechanic, lets you decide if it's something you can fix or need more advanced help.
Xtruck Y10 is a standalone, six-language diagnostic tablet that combines OBD-II / EOBD / JOBD full-protocol coverage with a daylight-readable 2.8-inch LCD and an integrated 16-pin cable. No battery, Bluetooth pairing or app subscription is required—simply plug the 0.8-meter cable into the vehicle’s OBD port and the unit powers itself (8-36 V tolerant) to deliver OEM-level functional tests in under 10 seconds.
Core Functions
• Read & Erase DTCs—shows generic (P0/P2/P3) and manufacturer (P1) codes with built-in DTC look-up library
• Freeze-frame capture—records RPM, load, speed, temp, fuel trim at the instant the fault occurred
• I/M readiness monitor status—graphical “green/red” flags for catalyst, O₂ sensor, EGR, EVAP, misfire, fuel system, comprehensive component; ideal for pre-smog verification
• Live data stream—up to 8 PIDs simultaneously (vehicle speed, ECT, IAT, MAF, O₂ voltage, STFT/LTFT, etc.)
• Real-time curve mode—plots any two PIDs as time-based waveforms for intermittent diagnosis
• Vehicle information—one-click VIN, CAL-ID, CVN retrieval for service records and parts ordering
• MIL control—force MIL (check-engine light) off after repair; verifies lamp circuit integrity
• On-board monitor test (mode 6)—view test limits and measured values for advanced troubleshooting
Multilingual Menu System
User-selectable: English, Deutsch, Français, Español, Italiano, Nederlands. All DTC definitions, menu prompts and help text are fully localized—no cryptic hex codes for non-English users.
Typical Use-Cases
1. Pre-inspection smog check—confirm readiness monitors are complete before visiting the station
2. Road-side quick test—read DTC within 30 s of flame-out or limp-mode event
3. Used-car evaluation—verify VIN, mileage consistency and permanent DTCs before purchase
4. Service bay work-horse—erase codes after repair and perform monitor drive-cycle verification
5. Fleet maintenance—document freeze-frame data for warranty claims and trending analysis
Package Contents
• XTRUCK YO10 diagnostic tablet
• Quick-start card (6 languages)
• Protective silicone sleeve
• Kraft box 180 × 120 × 40 mm
Certifications & Support
CE, RoHS, FCC Part 15 Class B compliant; meets SAE J1978, J1979, ISO 15031-5 and ISO 27145-3. Lifetime firmware updates via micro-USB port; technical support 24 h e-mail turnaround.
Bottom Line
Whether you are a professional technician who needs a fast, cable-safe tablet for every bay, or a discerning owner who refuses to pay dealer diagnostic fees, XTRUCK Y10 delivers complete OBD-II functionality in six languages—no app, no battery, no surprises.
No-delivery refund
