Electric Screwdriver and Drill Set with 2 21V 1500mAh Drills with Torque Maximum Speed Drilling Power Tool Set with 21 Drills and Storage Easy To Use

21V High-Performance Electric Screwdriver Set: This three-in-one rechargeable electric drill and screwdriver is perfect for a variety of tasks, including assembling furniture, drilling wood, and tightening screws. Its cordless design makes it easy to use even in places without a power source. Equipped with two 1.5Ah high-capacity batteries (compatible with Makita models), it allows for long periods of continuous operation. Weighing just 1.2kg (included), it's lightweight enough to hold with one hand without fatigue, making it easy for even women to use on DIY furniture assembly projects. 25-Level Torque Adjustment & High/Low Speed Switch: The clutch function allows for 25 levels of torque adjustment, allowing you to freely adjust the torque to suit your work needs. The electric drill's rotation speed can be switched between two levels (0-350 RPM/0-1400 RPM), and can be continuously fine-tuned by adjusting the force of the trigger. The speed and torque adjustment functions prevent damage to a wide range of materials, allowing for clean assembly. [One-touch forward/reverse switch & safety lock] You can operate the forward/reverse switch lever while holding the electric screwdriver. Simply switch the lever from right to center to left to easily switch between tightening, locking, and unscrewing. When not in use, simply move the forward/reverse switch lever to the center position to securely lock the trigger and prevent accidental malfunction. [Equipped with 2 PCS/LED Battery Level Indicator] This small electric drill is powered by a 21V, 1.5Ah lithium battery. The high-quality AAA batteries are protected against overheating, overcharging, and explosion, ensuring stable battery performance. Rest assured about safety and reliability. Tested and capable of running for 30-60 minutes on a single battery. With a spare battery, you don't have to worry about running out of power mid-work. It takes just 2 hours to fully charge. The battery LED clearly displays the remaining battery level and charging status, making it easy to see at a glance! It's also compatible with genuine Makita 18V batteries. [Accessories] It comes in a case, so it's very compact and easy to store! Included accessories: 6 bits, 9 hex sleeves (5-13mm), 6 drill bits, 1 flexible shaft, 2 connecting rods, 2 21V 1.5Ah batteries, AC adapter, storage case, and a Japanese instruction manual. A great help for assembling furniture and DIY projects! TMOHOIJJ electric drill driver for a wide range of uses ●It can be used as an electric drill as well as an electric screwdriver, and is useful for a variety of tasks such as assembling furniture and electrical equipment, as well as tightening screws and drilling holes in wood, metal, and concrete. This rechargeable electric drill driver weighs approximately 1.2 kg, making it small, lightweight, and easy to carry. It also features an ergonomic grip that is made of a non-slip material and is thick enough for easy grip. 25 torque levels The torque function can be adjusted in 25 steps, allowing you to select the torque to suit a wide range of applications, such as soft materials, thick or hard materials, etc. large capacity Two 1500mAh rechargeable lithium batteries are included. Compatible with genuine Makita 18V batteries. Fast charging allows for long-term use as a household power tool. High/low speed switching It can be switched between high speed mode (0-1400 rpm) and low speed mode (0-350 rpm). The advantage is that you can use the low speed when drilling holes in wood and the high speed when drilling holes in metal. Forward/reverse rotation switch Adjust the forward/reverse switch lever to the left or right to change the direction of rotation of the bit and tighten or loosen screws. Positioning it in the middle position locks it in place to prevent accidental start-up. Easy installation Continue turning the chuck counterclockwise to open the jaws at the tip of the chuck. Place the bit into the open chuck and continue turning the chuck clockwise to secure the bit. LED lighting included This electric drill driver has an LED light next to the power switch. The light turns on when you start working, clearly illuminating your hands and making it easy to work in dark, hard-to-see places.