Elbow Screw Fitting 32 X 3 - 3/4" AG

Elbowed threaded fitting 32 x 3 - 3/4" Male Threaded fittings for simple and quick assembly without a press tool Advantages : Economical alternative to traditional press systems All materials are safe for use in drinking water and comply with the UBA positive list Two O-rings prevent the penetration of air oxygen Features : DVGW DW-8501CP0053 Continuous resistance : 10 bar / 70° C / 50 years Maximum operating temperature 95° C Application areas : Potable water installations Underfloor / ceiling heating Underfloor / ceiling cooling Radiator connection Oil-free compressed air up to 10 bar Certifications : DVGW IMA EN ISO 21003 GOST Hygiene Certificate For a quick and secure connection of pipes, you only need screw fittings, our aluminum composite pipe, pipe pliers, and a calibrator.For better understanding, we have included an illustrated assembly guide with photos. Assembly guide : Cut the pipe with an appropriate tool After cutting, the end of the pipe must be calibrated and deburred with a calibrator Nut and compression ring must be positioned on the pipe according to the illustration. Next, the nipple of the base body is fully inserted into the pipe. The clamping ring and the nut are pushed to the stop on the base body of the fitting. The nut can now be tightened by hand. The nut must be tightened with a suitable tool until the corresponding resistance is reached. Check the connection afterwards.. Please note that the use of other composite pipes than those sold by Boni-Shop is at your own risk.A connection compliant with the rules does not exist in all press systems except with system-approved components. (fittings and pipes tested together)This applies independently of the manufacturer to all composite pipe systems. The Seller confirms that its products comply with all applicable laws and are only offered if they comply with Joom's policies and European laws on product safety and conformity.