5A DC Power Supply Voltage Regulation Stabilizer LED Display for Manufacturing Industry

Feature: 1. Regulated DC power supply, suitable for manufacturing industry, colleges and universities and household appliances maintenance. 2. With LED display of OVP, OCP, four‑digit voltage and current, clear and intuitive, convenient for using. 3. Features 0‑30V output voltage and 0‑5A output current, which has stable and reliable performance. 4. Made of high quality metal material, rugged, anti‑corrosion and durable, which has long lifespan. 5. Manufactured according to the original production specifications, in line with strict quality standards. Specification: Item Type: DC Power Supply Material: Metal Specification: 30V 5A Output Voltage: 0 30V Output Current: 0 5A Working Conditions: Temperature: 0 40 celsius , relative humidity: less than 80percent RH Storage Conditions: Temperature: 20 60 celsius , relative humidity: less than 80percent RH Temperature Range to Ensure Accuracy: 23 celsius + 5 celsius #Voltage Load Regulation Rate: less than 0.1percent +5mV Power Regulation Rate: less than 0.01percent +5mV Set Resolution: 10mV Setting Accuracy: less than 0.1percent + 1 Digits Readback Resolution: 10mV Readback Accuracy: less than 0.1percent + 1 Digits Ripple: 10mVrms #Current Load Regulation Rate: less than 0.2percent +3mA Power Regulation Rate: less than 0.2percent +3mA Set Resolution: 1mA Setting Accuracy: less than 0.2percent + 3mA Readback Resolution: 1mA Readback Accuracy: less than 0.2percent + 3digits Ripple: 8mVrms OVP: Vmax+2V Maximum Voltage: Vmax+ 0.2percent OCP: Cmax+1A Maximum Current: Cmax+ 0.2percent Working Conditions: Temperature: 0 40 celsius , Relative Humidity: less than 80percent RH Storage Conditions: Temperature: 20 60 celsius , Relative Humidity: less than 80percent RH Cooling Method: Wind Cooling Weight(Approx.): 1928g 68oz Size(Approx.): 80 x 150 x 230mm 3.1 x 5.9 x 9.1in How to Use: 1. Keep the switch off. Connect the power cord of the power supply. Make sure that the L end of the power cord plug is connected to the live wire of the power outlet and the ground wire is grounded. 2. The power supply must be grounded when in use. 3. Please pay attention to good ventilation when using. Keep a gap of 10cm with other items on the four sides of the power supply. Do not expose the power supply to dust, corrosive gas and other harmful substances. 4. The power supply specifications should be measured after 15 minutes of warm up . 5. Before connecting the power supply, please make sure that the voltage input switch is consistent with the mains, otherwise it will cause a serious failure. Maintain: 1. Under normal power supply voltage, the digital display failure after power on may be due to a blown fuse or other failures. Then, after disconnecting the power switch and unplugging the power cord, replace the fuse or seek professional help. 2. When using a stable voltage source, because the CC light is on to protect the current, when the output voltage is less than the required value, the power supply will automatically switch to a stable current working state. In this case, check the load or increase the maximum current (adjust the current in a clockwise direction). 3. When using a stable current source, because the CV light is on and the output current is less than the expected value, the power supply will automatically switch to a stable voltage working state to provide voltage protection. In this case, check the load or increase the maximum voltage (adjust the voltage in a clockwise direction). 4. If the fault is serious and cannot be solved, please contact your dealer or our company.. Package List: 1 x DC Power Supply1 x Power Cord1 x 2 In 1 Test Line1 x Manual