2 Position 5 Way Solenoid Valve Pneumatic Reversing Switch Control Valves G1 4in IntakeAC 110V+ 15percent

Feature: 1. Simple to Operate: The solenoid valve is designed with 5 way 2 position, has arrow water outlet sign, which is convenient for installation and operation. 2. Copper Coil: Using copper coil, more energy saving and low power consumption, not easy to generate heat during use. 3. Fine Processing: Aluminum alloy valve body, fine polished sand on the surface, has smooth inner wall without burrs. 4. With Metal Spring: Built in stainless steel spring, not easy to deform, to maintain good operating of the function keys. 5. Wide Applications: The pneumatic solenoid valve has good sealing performance and is often used in machinery and robotics industries, etc. Specification: Item Type: Solenoid Valve Product Material: Aluminum alloy + stainless steel + copper Product Model: 4V210 08 boutique model Coil Aperture: Approx. 2mm 0.08in Working Medium: Air Port Size: Intake, Outlet: G1 4in, Exhaust: G1 8in Effective Cross Sectional Area: 16.0mm² Position Number: 5 Way 2 Position Pressure Range: 0.15 0.8MPa Working Temperature: 20 70 celsius Maximum Working Frequency: 5 times sec Power Consumption: 4.5VA Proof Rating: IP65 Application: Medical equipment industry, food processing industry, robotics industry, chemical plant application industry, textile industry, automation workshop. Package List: 1 x Solenoid Valve Note: 1. When installing the solenoid valve, note that the arrow on the valve body should be consistent with the flow direction of the medium. Do not install in a place where there is direct dripping or splashing water. The solenoid valve should be installed vertically upwards.2. The solenoid valve should be guaranteed to work normally within the 15percent ‑10percent fluctuation range of the power supply voltage of the rated voltage.3. After the solenoid valve is installed, there must be no reverse pressure difference in the pipeline. It needs to be energized several times to make it suitable for temperature before it can be put into use formally.4. The pipeline should be thoroughly cleaned before installation of the solenoid valve. The medium should be free of impurities. Install a filter before the valve.5. When the solenoid valve fails or is cleaned, a bypass device should be installed to ensure the system continues to run.